1. Manuals
  2. Brands
  3. IsmartZon Manuals
  4. Network Hardware
  5. D5004NH
  6. User manual

IsmartZon D5004NH User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Network Video Recorder
User Manual
2014.4

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the D5004NH and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for IsmartZon D5004NH

  • Page 1 Network Video Recorder User Manual 2014.4...

  • Page 2: Table Of Contents

    NVR User Manual Content 1 Precautions.............................4 2 Declaration .............................4 3 Product Introduction ........................4 3.1 Product Overview........................4 3.2 Features ..........................4 . 4 Installation............................5 4.1 Unpacking Inspection......................5 4.2 Installation Preparation.......................5 4.3 Installation of the burner ....................5 4.4 The Front Panel ........................7 4.5 The Rear Panel ........................
  • Page 3 NVR User Manual 6.3 Record ..........................23 6.4 Network..........................24 6.5 PTZ Configuration......................26 6.6 Alarm ..........................26 6.6.1 Video Detection......................26 6.6.2 Alarm input ......................2 7 6.6.3 Alarm out ........................ 2 7 6.7 System.s ..........................28 6.7.1 Base ........................28 6.7.2 Display ........................28 6.7.3 Storage ........................2 9 6.7.4 Abnormity .......................

  • Page 4: Precautions

    NVR User Manual 1 Precautions The following content is about the use of the product, the safety measures of the product, as well as the preventing of property loss. Please be sure to comply. 1. Please placed NVRs somewhere with the permissible range of temperature and humidity. 2.

  • Page 5: Installation

    NVR User Manual Recording function Includes support timing, linkage alarm, motion detection, SATA hard and local hard disk, NVR data backup and network backup. Video playback function Has the ability to search videos by using a variety of conditions, and can playback locally or through a network.

  • Page 6: The Rear Panel

    NVR User Manual Hard Disk Specifications: 3.5-inch SATA hard disk drive (maximum capacity is 2TB). Installation Steps Make sure to take precautions against static electric discharge when installing the hard disk. Static discharge can damage the drive and the internal components of the NVR. To reduce this risk, it is best to work on an anti-static mat and use a grounding wrist strap.
  • Page 7 The Back Panel 4CH NVR Rear Panel Interfaces (Mini case) Index Name Description The video/audio output The input interface of the audio signal The network interface The network interface of RJ-45 The VGA interface The output interface of the VGA video signal The power input The power input interface The HDMI interface...

  • Page 8: Basic Operations Guide

    NVR User Manual 5 Basic Operations Guide Power On and Off 5.1.1 Power On Correctly install and power on the NVR. When the power indicator lit up, the NVR will automatically start. The NVR will automatically detect hardware state of the device during the starting.
  • Page 9 NVR User Manual Preview and Login in 5.2.1 Preview After the device is turned on, you will enter the real-time monitoring interface. Right click and the following interface will pop up. 5.1.2 Login In Click [main menu], and then input the username (default : admin) and the password of the NVR (default : 123456 ) to complete the login.

  • Page 10: Ip Camera

    NVR User Manual IP Camera 5.4.1 Add IP Camera Network channels are used to display remote IPCs. The addition of IPCs shows as the following interface in 2 different methods: one way is an automatic method （UPNP）, the other way is manual bulk adding method.
  • Page 11 NVR User Manual Remark: Status bar show green icon that means the IPC have been connected successfully. Manual bulk adding mode Step 1: Please make sure that ” DHCP” option on the NVR menu is checked it will prompts “Obtain IP Automatic Configuration.” Step2：...
  • Page 12 NVR User Manual Step 3: Choose “ONVIF” on the ”Filter” option.
  • Page 13 NVR User Manual Step 4：Click “Search” to search the connected IPC. Step 5：Check the need to add IPC, and click “BatchAdd” to add.
  • Page 14 NVR User Manual Step 6：Once adding camera is done, the added IPC list with IP address will be displayed under the menu “the equipment has been added.” Remark: Status bar show green icon that means the IPC have been connected successfully.

  • Page 15: Status Display

    NVR User Manual 5.4.2 Status Display Right click in the real-time monitoring screen and select [net channel] to view the status of the network channels. 5.5 PTZ Control Right click on the channel you wish to use the PTZ control, and select [PTZ] to enter the PTZ interface.

  • Page 16: Ptz Configuration

    NVR User Manual 5.5.1 PTZ configuration The direction of PTZ, steps, zoom, focusing, iris, preset points, cruising between points, patrols, sweeping the boundary, calling an auxiliary switch, light switch, horizontal rotation are controlled using the arrow keys. The [Step] is mainly used to control directions. The figure can be set from 1 to 8. Directly click to adjust zooming, sharpness and brightness adjustment.
  • Page 17 NVR User Manual Index Type Description Calendar Date and Time Time Input the date and time of records searched. Full screen, circle playback, stopping / playing, pausing, fast playing, slow Play playing, and the previous/next frame on a suspended state . Recording Select recording type to be searched: NORMAL, ALARM or MOTION.

  • Page 18: Record

    NVR User Manual Playback Control: Description Remark During playback, pressing this key, Video playback : allows you to Fast-Forward with a Fast-Forward button number of speeds to choose from. The  Fast-Forward button can also be used as a reverse of the Slow Motion key. During playback, pressing this key Actual play rate is based on provides a variety of slower playback...

  • Page 19: Alarm

    NVR User Manual Alarm 5.8.1 Alarm Output This menu manages alarm output parameters and displays the current state of alarm. 【Channels】The number of channels that are in alarm status. 【 Schedule】 Alarm output is in control of alarm configuration. 【Manual】 Alarm output is on and the status is active. 【Stop】...

  • Page 20: Alarm Status

    NVR User Manual [Linkage Set]When produce an alarm, you can activate the linkage of records, PTZ, touring and capturing. Alarm Input Enter [main menu]-[alarm]-[alarm input]. 【Alarm input channel no.】Select a channel. 【Enable】Select the enable switch. 【 Type】 It can be normal open or normal close.

  • Page 21: Color Setting

    NVR User Manual 5.9 Color Setting Adjust the specified screen's (only able to do a single screen at a time) image huge, brightness, contrast, saturation, gain, and white level parameters. Set two time periods for day and night. The device will automatically switch to the best video quality. 【Period】Two periods can be set according to ambient light during the day and night, device will automatically switch configuration time.

  • Page 22: Parameter Settings

    NVR User Manual 6 Parameter Settings 6.1 Introduction On Main Menu The main menu is shown in the following interface. 【Search】Search records by types, channels, time and playback records. 【Video】Set basic, encoding, snaps and net channels. 【Record】Set basic and record plan. 【...

  • Page 23: Encoding Settings

    NVR User Manual 6.2.2 Encoding settings 【Channel】Select the desired channel. 【Compression】H.264 【Resolution】The resolution of main stream can be D1 or CIF. Different channels can be set to different resolutions. Also, frame rate can be set differently for each channel. The minor stream resolution can support either CIF or QCIF. FrameRate : PAL system: 25 fps.

  • Page 24: Net Channel

    NVR User Manual 6.2.4 Net Channel First, open the enable switch. 【 Channel 】 Select the desired channel. 【 Protocol 】 Choose a protocol supported by IPCs. 【Address IP】Input the IP of the IPC. 【Port】Input the port of the IPC. 【User name】Input the user name of the IPC.

  • Page 25: Network

    NVR User Manual Record Plan 【 Channel 】 Select a channel. It uses green, yellow and red to show motion detection, alarm and regular records correspondingly. 【 Copy 】 Copy the settings to other channels. Click the set button to enter the following interface. 【Time 】Recording time.
  • Page 26 NVR User Manual Advanced 【TCP】default: 8000, variable 【HTTP】default: 80 【UDP】default: 8001 【Multicast】tick ‘Multicast’ and set a group in ‘Set’, IP should be limited as follow picture, there is no limit on the port number. Net Apply 【DDNS】Enable the NVR to registered a DDNS hostname, which runs on a fixed IP address web client.

  • Page 27: Ptz Configuration

    NVR User Manual Server IP: Input IP of NTP server. Port：The default port is 123. Update cycle: The interval time is between 1 to 65535 min. 【IP Filter】NVR authority management. If you enable the white list, only the filled IPs can be connected.

  • Page 28: Alarm

    NVR User Manual 6.6 Alarm 6.6.1 Video Detection 【Channel】Select a channel. 【Alarm type】Dynamic monitoring, video loss and video blind. ：Open the enable switch. 【Process】Set the alarming time, linkage and the handling method. 【Area Set】The function should be set in the remote IPC. 【Linkage Set】When a alarm occurs, you can set linkage of records, PTZ, touring and snapshot.

  • Page 29: Alarm Out

    NVR User Manual 6.6.3 Alarm out 【Channel】Alarm port 【Auto】Alarm output is determined by the alarm output menu, while in auto mode. 【Manual】Alarm output is on and the status is active. 【Stop】Alarm output is off and the status is inactive. 【Status】Current status of alarm output Note: Some models have no local alarm, please refer to the products descriptions.

  • Page 30: Display

    NVR User Manual 6.7.2 Display Output mode 【Menu Transparency】Adjust transparency. 【 VGA Output 】 Select VGA resolution. The default is 1024×768@60Hz. Tour configuration Setting tour mode and interval between rotation , the time is within 5-120s，the mode include single screen, four-, eight-, nine-, sixteen-screen. 【Motion Tour Type】Set the motion detection tour mode 【Alarm Tour Type】Set the alarm tour mode...
  • Page 31 NVR User Manual...

  • Page 32: Abnormity

    NVR User Manual Backup Connect an External USB device with the USB port to backup in the “Record Backup” menu. 【Detect】Identify external USB device and display the device information. 【Backup】 Tick the external device and click 【Backup】 to enter the backup menu .Select the record start-stop time and click 【Add】Add files in list.

  • Page 33: Maintain

    NVR User Manual 6.7.6 Maintain You can see logs of the system, product information ,default settings and maintain information in the following interfaces. 6.7.7 Account Note: Group and user names can be from 1-6 characters in length. Valid characters include letter, numbers, and limited symbols: underline, subtraction sign, dot, you may not use a space as a leading or ending character.

  • Page 34: Rs232

    NVR User Manual A user can only belong to one group. User rights cannot exceed group rights. 【Modify users】modify existing group member information and authority. 【Add group】add group and set group authorities Set a group and authorize 60 items including control panel, shut down, live view、 playback, record, record backup, PTZ control, account, system information, alarm in /out setting, system configuration, search log, log delete, upgrade, operation authority, etc.

  • Page 35: The Control Installation And The User Login Logout

    NVR User Manual Ensure the IP is correct and check whether the NVR is on the network by using the Windows command “ping”. 7.1.2 The control installation and the user login logout Users can remote access to NVR by Internet Explorer, assuming you have a correct network configuration.

  • Page 36: The Interface Of Web Operations

    NVR User Manual 7.1.3 The Interface of Web Operations WEB Interface Description Index Name Description Channel Channel selection Local playback: playback local record Function key Open all: play live views in surveillance window Surveillance window Change window layout Image color: modify brightness, contrast and Image color &...
  • Page 37 NVR User Manual Click on 2 area in upper right corner can choose open / close the channel of the main stream or secondary stream, shows the current NVR's IP and rate information. Stream information Lower left corner shows the current video channel name. Upper right corner shows the current video time information.

  • Page 38: Ptz Control

    NVR User Manual 7.1.5 PTZ Control Set protocol（see【Setting】→【PTZ】 ） Control PTZ direction, step size, zoom, IRIS, preset, tour, pattern, border scan, light, wiper, auto pan, etc. Step size controls PTZ direction and speed, e.g. step size 8 is moved faster than step size 1. Eight direction rotations: up, down, right, left, up-left, up-right, lower left, lower right.

  • Page 39: Configuration

    NVR User Manual 7.1.6 Configuration Access NVR local configuration menu by seleting “System Setting”, the further details please refer 【Local operation guide】 Configuration 7.1.7 Search Record Select “Search record” to open the search interface. Then, user can search and operate record, alarm, motion, local record.

  • Page 40: Alarm Configuration

    NVR User Manual Searching 7.1.8 Alarm Configuration Click the 【Alarm】 To enter the alarm setup menu, users can set up and operate the alarm mode. Alarm configuration Choose type of alarm on menu, monitor video loss, motion detection, disk full, disk error, video mask, external alarm.

  • Page 41: About

    NVR User Manual 7.1.9 About Please refer to WEB controls related version information. 7.2 The Client Operations Please refer to description of IMS 200. 8. Appendix 8.1 Expansion function 8.1.1 DDNS Function(not needed if P2P cloud connection is used) FNT DDNS FNT DDNS is built-in professional dynamic DNS service in our network NVR.

  • Page 42: Username

    NVR User Manual Domain name xxx.3322.org Username Password xxxxxx After setting up the information as above, you can access the Embedded NVR via XXX.3322.org Notice: The main machine’s IP should refer to the information of the website. NO-IP（www.no-ip.com） Register Register new username at no-ip, click 【Create Account】. Create domain name, click 【Add a Host】.

  • Page 43: Port

    NVR User Manual Run Command Line Program Input “ping+ Domain name” then presses Enter, as the Diagram 0-1 DNS shows. Diagram 0-1 DNS The computer will analyze the domain name which is set in the NVR and return to the current IP, as the picture shows underlined in red.

  • Page 44: Ptz Control

    NVR User Manual TCP port 80 into the port mapping chart of the router. There are two ways to map the port: UPnP function automatically map and modify the router’s port mapping chart by manual. Manual port mapping The first step Connect the Embedded NVR to the Router, set the static IP.

  • Page 45: Hdd Capacity Calculation

    NVR User Manual Pattern You can begin the desired path or end a path by filling the figure in the box. 8.2 HDD Capacity Calculation 8.2.1 Reference of HDD Capacity Calculation The first time install NVR, please check if the HDD is installed. The capacity of the HDD There is no limitation of capacity of single HDD to NVR, please choose the HDD according to the recording hours required.
  • Page 46 NVR User Manual a) Get into www.seagate.com， Click Support & Downloads choose Sea Tools, download tool, as Diagram 7-1: Diagram 0-2 Seagate download b) Double-click to install downloaded file, click installed file to detect the HDD information on PC. c) Choose the HDD for detection (other manufacturer’s hard disk suitable too). How to detect WDC HDD a) Get into www.wdc.com , choose WD support / download / SATA&SAS / WD Caviar / GP, download software as Diagram 0-3 WD Download...

  • Page 47: Common Faults

    NVR User Manual 8.3 Common Faults NVR startup failure or continuously reboot Possible reasons: The system has been damaged from a bad NVR update. There is a problem with the NVR main board error, please contact supplier. There is an HDD error. Replace faulty HDD. Remote control does not work Possible reasons: Check for batteries in remote control, especially positive and Negative.
  • Page 48 NVR User Manual Diagram 0-4 IE tool bar Internet Explorer 9.0 Possible reasons: Internet Explore9.0 above version visit: Please choose compatible mode.
  • Page 49 NVR User Manual Appendix1. Remote control operation Item Name Function number Multi-window button Split screens button Numeric button Code input/number input/channel switch Exit button Direction button Up ,Down, Left, Right and Enter/Menu button Record/Playback control Control recording playback Enter short menu as “record mode” button Record mode Input the number of DVR to control Assistant function...

Table of Contents