I.
Installing Cook Top:
•
First feed the power wire through the hole and to the location of the power receptacle underneath the
cabinet.
'h''
•
The
overhang on the induction cooker comes with pre-installed foam gasket. Peel off the adhesive
protector on the bottom of the gasket and set the induction cooker into the cut-out. Gently press down
on the induction cook top to secure the adhesive gasket to the countertop. The cook top should be sitting
on the supports previously installed.
•
For RV use, apply butyl tape instead of the supplied foam tape. Butyl tape will provide adequate
adhesion and still allow for removal if the unit needs to be serviced.
• • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • • •
3