Table of Contents
Advertisement
Activate operation of the sliding/tilting roof
Read and observe
and
If the operation of the sliding/tilting roof is deactivated (e.g. after disconnect-
ing and connecting the battery), then operation will have to be activated.
›
Switch on the ignition, pull the switch on the recess all the way down in the
direction of arrow
» Fig. 63
1
The sliding/tilting roof opens/closes again after around 10 seconds.
›
Release the lever.
Manually operated sunshade
Read and observe
and
›
To open, pull the handle in the direction of arrow
›
To close, pull the handle in direction of arrow
Fig. 63
Operation of the sliding/tilting
roof
on page 72 first.
and hold.
Fig. 64
Operation of the sunshade
on page 72 first.
A
» Fig.
64.
.
B
Electrically operated sunshade
Read and observe
and
Operation of the sunshade
» Fig. 65
Open - by pressing (press again - sunshade stops moving)
Close - by pressing (press again - sunshade stops moving)
The sunshade can also be operated by pressing and holding the appropriate
button (starts movement of the sunshade) and releasing it when the sunshade
reaches the desired position.
Activating operation of the sunshade
Read and observe
and
If the operation of sunshade is deactivated (e.g. after disconnecting and con-
necting the battery), then the operation will have to be activated.
›
Switch on the ignition, press and hold the
The sunshade opens and closes again after around 10 seconds.
›
Release the button.
Fig. 65
Buttons for operating the sun-
shade
on page 72 first.
on page 72 first.
» Fig. 65
on page 73 button.
Unlocking and opening
73
Advertisement
Table of Contents
