PowerXT residential solar modules. Read this document before installing, wiring, or using this product. Failure to comply with these instructions will invalidate the Solaria Limited Warranty and may cause loss, damage or injury. Limited Warranty Module limited warranty is described in The Solaria Corporation PowerXT Warranty.
Page 5
All Solaria modules are factory supplied with bypass diodes located in the junction box. These diodes protect the shaded cells within a module. Partial shading of a single module in a string of modules causes reverse voltage across the shaded cells.
Page 6
National Electric Code (NEC). Refer to NEC article 250 on grounding PV arrays for specific requirements. Solaria PowerXT residential solar modules may be installed on a mounting system certified to UL 2703 with approval of the mounting system manufacturer.
Warranty is contingent upon modules being mounted in accordance to the requirements described in this section. 4.1 Site Considerations Solaria modules should be mounted in locations that meet the following requirements. Module should not be mounted in locations where it will be in direct contact with salt water.
Page 9
The Solaria modules must be mounted using industry standard ground mount hardware roof mount hardware, or single and dual axis PV trackers. If other mounting means are employed, then product certification or fire class ratings may be affected.
No license is granted by implication or otherwise under any patent or patent rights. The information in this Manual is based on The Solaria Corporation knowledge and experience and is believed to be reliable; but such information, including the product specifications (without limitations) and suggestions, do not constitute a warranty, expressed or implied.
Need help?
Do you have a question about the PowerXT-R and is the answer not in the manual?
Questions and answers