RedRacks Burco V-121524B-Al Assembly & Instruction Manual

Aluminum v-series windshield carriers

Hide thumbs

Table Of Contents

V-SERIES ALUMINUM

Assembly & Instruction Manual

Burco® Aluminum V-Series Windshield Carriers

V-Series Models and Specifications:

V-121524B-AL: (15" & 24" Mast Height), (12-Lite Capacity)

Overall Dimensions: 41"(L) x 30"(W) x 27"(H)

V-141524B: (15" & 24" Mast Height), (14-Lite Capacity)

Overall Dimensions: 47"(L) x 30"(W) x 27"(H)

Technical assembly required. Save instructions for future reference

or leave with final assembled rack.

Visit us online at www.burcoinc.com

Burco, Inc. 2936 South Wilson Court NW

Grand Rapids, MI 49534 800-253-2593

Page 1 of 7

®2017 Burco Inc

Table of Contents

Need help?

Do you have a question about the Burco V-121524B-Al and is the answer not in the manual?

Questions and answers

Summary of Contents for RedRacks Burco V-121524B-Al

Page 1 V-SERIES ALUMINUM Assembly & Instruction Manual Burco® Aluminum V-Series Windshield Carriers V-Series Models and Specifications: V-121524B-AL: (15” & 24” Mast Height), (12-Lite Capacity) Overall Dimensions: 41”(L) x 30”(W) x 27”(H) V-141524B: (15” & 24” Mast Height), (14-Lite Capacity) Overall Dimensions: 47”(L) x 30”(W) x 27”(H) Technical assembly required.
Page 2 V-SERIES ALUMINUM TABLE OF CONTENTS Cover Table of Contents & Tools Required Inside This Package Assembly Instructions (steps 1-2) Assembly Instructions (steps 3-4) Assembly Instructions (step 5) Replacement Parts TOOLS REQUIRED 3/16” Hex Wrench 9/16” Box End Wrench Tape Measure Cordless Drill Letter “X”...
Page 3 V-SERIES ALUMINUM INSIDE THIS PACKAGE End Bracket- Short Rails (1) Right, (1) Left End Bracket- Tall Slick Bobby™ Glass Slide Tool Hardware- Tall End Piece: Hardware- Short End Piece: 3/8 x 3/4” Bolts 5/16” x 3/4” Button Head 3/8” Lock Washers bolts 5/16”...
Page 4 V-SERIES ALUMINUM ASSEMBLY INSTRUCTIONS Step 1: (A) Place right and left rails facing each other as shown above. (B) Place tall end bracket into place and fasten (4 sets) of 3/8” x 3/4” bolts, 3/8“ lock washers, and 5/16” flat washers HAND TIGHT for now. Step 2: (A) Put short end bracket into place and fasten with (4 sets) of 5/16”...
Page 5 V-SERIES ALUMINUM ASSEMBLY INSTRUCTIONS Step 3: Once all of the fasteners are in place and hand tight, use a 9/16” box end wrench and a 3/16” hex wrench to tighten all fasteners to approximately 30 lb./ft. in eight places. The rack is now ready to be mounted onto its mounting surface. FRONT OF VEHICLE Option 1 Option 2...
Page 6 V-SERIES ALUMINUM ASSEMBLY INSTRUCTIONS Step 5: (A) Be aware of any and all equipment that is located below rack before installing. If drilling holes into the floor or bed of a vehicle, verify clearance of any gas lines, gas tanks, exhaust parts, or anything that is located directly underneath the mounting holes.
Page 7 V-SERIES ALUMINUM REPLACEMENT PARTS RCT-12 RFL-04 RCT-04 RFL-01 RTC-01 RFL-03 RCT-01 RBR-V121524B-AL RBR-V141524B-AL DESCRIPTION ITEM FITS MODELS RTC-01 Top Cap Both Models RFL-01 Finger Lock™ 2-7/8“ Both Models RFL-03 Finger Lock™ 3-1/8” Both Models RFL-04 Finger Lock™ 4“ Both Models RCT-01 13.75”...

This manual is also suitable for:

Burco v-141524b