Subaru legacy 2003 Service Manual page 28

COOLING
11) Connect connectors to radiator main fan motor
(A) and sub fan motor (B).
( A )
12) Connect radiator outlet hose.
13) Install under cover.
14) Lower the vehicle.
15) Connect battery ground cable.
16) Fill coolant. <Ref. to CO(H4DOSTC)-15, FILL-
ING OF ENGINE COOLANT, REPLACEMENT,
Engine Coolant.>
17) Check ATF level. <Ref. to AT-30, REPLACE-
MENT, Automatic Transmission Fluid.>
RADIATOR
C: INSPECTION
1) Remove radiator cap, top off radiator, and attach
tester to radiator in place of cap.
( B )
CO-00084
2) Apply a pressure of 157 kPa (1.6 kg/cm
to radiator to check if:
NOTE:
• Engine should be off.
• Wipe engine coolant from check points in ad-
vance.
• Be careful to prevent engine coolant from spurt-
CO-00153
ing out when removing tester.
• Be careful also not to deform filler neck of radia-
tor when installing or removing tester.
FU-00009
CO(H4DOSTC)-26
(1) Engine coolant leaks at/around radiator.
(2) Engine coolant leaks at/around hoses or
connections.
CO-00159
2
, 23 psi)