Advertisement
Startup/Logging in
The start-up and login steps are common between the server and client software.
1
1
Double-click the shortcut icon on the
desktop.
The VA-SW3050 starts and the login screen
appears.
The VA-SW3050 icon appears in the task
tray in the right bottom corner of the screen.
2
Click the appropriate radio button to
select the display language.
Available display languages:
English, French, German, and Spanish
3
Enter the user ID and password.
When you log in to the software for the first
time, use the factory setting values below.
USER ID
: admin
PASSWORD: admin
2
(The above figure represents the login screen for the server software.)
4
Click [OK].
When the software starts for the first time
after installation, the following screen
appears:
On the server software;
[Camera Setting] screen
On the client software;
[DATA Storage] screen
Once you have successfully logged in,
implement the required initial settings in
accordance with "Before Using the
Network Recorder" (page 2). For detailed
information on the setting steps, refer to the
electronic manual.
MEMO:
If the initial settings are completed, the main
screen will appear after logginged in.
On server software:
The camera information will be displayed on
the main screen.
On client software:
Live video will be displayed on the main
screen.
4
3
4
English
Advertisement
