LG 55LW9800 Service Manual page 20

9. 3D function test
9.1 Test equipment
(1) Pattern Generator MSHG-600 or MSPG-6100 (HDMI 1.4
support)
(2) Pattern: HDMI mode (model No. 872, pattern No. 83)
9.2 Test method
(1) Input 3D test signal as Fig.1.
O
Fig.1
<HDMI Mode 872, Pattern No.83
(2) Press 'OK" key as a 3D input OSD is shown.
(3) Check pattern as Fig2 without 3D glasses. (3D mode
without 3D glasses)
O
Fig.2
Copyright LG Electronics. Inc. All right reserved.
Only for training and service purposes
K
K
9.3 2D to 3D function test
9.3.1. Equipment setting
1) Input Combination Pattern like Fig.1
(8 color 16 step gray / MSPG-XXXX pattern number 8) in any
Input
(Fig.1)
9.3.2. 2D to 3D Function Inspection
1) Enter the Swap Button (Yellow Color) (Refer Fig.3)
(Fig2)
2) Check the separated line in the SET
• When you enter the swap button. 3D Depth value is set to
Maximum value (20) automatically.
And 3D Viewpoint value is set to Maximum Value (10)
automatically.
Worker has to enter the ETC Key Before using the swap
button.
- 20 -
(Fig4)
LGE Internal Use Only
(Fig3)