Table of Contents
Advertisement
3. Intended Use
This product is an electrically powered model helicopter, which is wirelessly controlled with the remote control unit
included in the delivery. The model is designed for operation indoor but may also be used outdoors at totally calm
conditions. The model helicopter is pre-assembled and ready to fly and is delivered with built-in remote control and
drive components.
The product must not become damp or wet.
The product is not suitable for children under 14 years of age.
Observe all safety information in these operating instructions. They contain important information on han-
dling of the product.
You are solely responsible for safe operation of the model!
4. Product Description
The ready-to-fly mini helicopter has a rotor head with a fixed angle of incidence for both main rotor blades that can-
not be adjusted by remote control. The raising and lowering of the helicopter is solely accomplished by changing the
speed of the main rotor.
The swash plate is controlled via two servos with two linkage points offset by 90°. Targeted yaw and tilting of the
swash plate permits continually recurring, direction-dependent (cyclic) blade adjustment that permits flying into a
specific direction.
Stabilisation around the vertical axis (main rotor shaft) is handled by a tail rotor, which also has a stiff angle of attack
and is powered by a separate electric motor. Steering around the yaw axis is achieved by means of different revolu-
tions of the electric motor.
A central electronics PCB below the canopy contains all components that are required for control, steering and
stabilisation of the helicopter. The 2.4 GHz radio remote control installation included in the delivery allows a sensitive
steering of the model.
For operation, 4 mignon batteries (e.g. Conrad item no.: 652506, order 4x) or mignon batteries are required.
5
Advertisement
Table of Contents
