Transport & Storage unit. Startup and Temperature Regulations 6) How to clean your SunStar unit: a) Pull the plug off before cleaning the unit. Cable Requirements b) Wipe down the interior walls with a soft cloth dipped in a neutral detergent.
FORM 2 Fault Cause Solution The following should be included in your SunStar Unit Packaging. If Faulty indicators and / or 1. Loose contact 1. Make it tight something is missing, please contact the number at the back of this non operation of the 2.
Product Model Power Available Capacity company or our local institutions with special engagement. ST-14CF DC 12V/24V 400 L The following are NOT results of faulty equipment: 14 cu. ft. 1) The condenser in the corresponding internal wall will make the external condenser feel hot.
START UP & TEMPERATURE REGULATIONS FIGURE 4 1) START UP a) Switch the power on and the red indicating light on the temperature control panel will come on (See Figure 4 on Page 4), and the compressor will start up. The machine will begin to refrigerate/freeze.
Need help?
Do you have a question about the ST-14CF and is the answer not in the manual?
Questions and answers