Table of Contents
Advertisement
Quick Links
Quick Installation Guide
Moxa Americas:
Toll-free: 1-888-669-2872
Tel:
1-714-528-6777
Fax:
1-714-528-6778
Moxa Europe:
Tel:
+49-89-3 70 03 99-0
Fax:
+49-89-3 70 03 99-99
Moxa India:
Tel:
+91-80-4172-9088
Fax:
+91-80-4132-1045
ME-10-T
1-slot chassis
Edition 1.1, May 2017
Technical Support Contact Information
www.moxa.com/support
2017 Moxa Inc. All rights reserved.
Moxa China (Shanghai office):
Toll-free: 800-820-5036
Tel:
+86-21-5258-9955
Fax:
+86-21-5258-5505
Moxa Asia-Pacific:
Tel:
+886-2-8919-1230
Fax:
+886-2-8919-1231
P/N: 1802000100010
Advertisement
Table of Contents
Summary of Contents for Moxa Technologies ME-10-T
- Page 1 ME-10-T Quick Installation Guide 1-slot chassis Edition 1.1, May 2017 Technical Support Contact Information www.moxa.com/support Moxa Americas: Moxa China (Shanghai office): Toll-free: 1-888-669-2872 Toll-free: 800-820-5036 Tel: 1-714-528-6777 Tel: +86-21-5258-9955 Fax: 1-714-528-6778 Fax: +86-21-5258-5505 Moxa Europe: Moxa Asia-Pacific: Tel: +49-89-3 70 03 99-0...
- Page 2 Introduction Overview Moxa’s NRack System includes the ME-10-T, which is a 1-slot chassis for selected Moxa media converter slide-in modules. The ME-10-T allows network administrators to connect various copper and fiber-optic network media over different protocols. The ME-10-T provides installation space for up to 1-slot media converter slide-in modules at the front of the unit.
- Page 3 The aluminum DIN-rail attachment plate should be fixed to the back panel of the ME-10-T when you take it out of the box. If you need to reattach the DIN-rail attachment plate to the ME-10-T, make sure the stiff metal spring is situated at the top.
- Page 4 Wiring the Alarm Contact The alarm contact is made up of the three middle contacts of the terminal block on the ME-10-T’s top panel. Refer to the next section for detailed instructions on how to connect the wires to the terminal block connector, and how to attach the terminal block connector to the terminal block receptor.
- Page 5 Replacing the Media Converter Slide-in Modules To replace a media converter slide-in module in the ME-10-T chassis: The media converter slide-in module can be hot-swapped, which means the chassis doesn’t have to power off during the installation or when the module is being removed.
-
Page 6: Specifications
Specifications Physical Characteristics Housing SECC (1.2 mm) Dimensions 180.1 x 89.4 x 28.5 mm (7.09 x 3.52 x 1.12 in) Weight 0.53 kb (1.17 lb) Number of Slots 1 slot on the front for slide-in modules Environmental Limits Operating -40 to 75°C (-40 to 167°F) Temperature Storage -40 to 85°C (-40 to 185°F)
Need help?
Do you have a question about the ME-10-T and is the answer not in the manual?
Questions and answers