Pair Bluetooth Devices - Zte Warp Elite N9518 User Manual


To disable Bluetooth, tap the slider again.
Tip: You can also turn Bluetooth on or off with the toggle menu in the notifications panel. Drag the status
bar down to display the notifications panel and then tap Bluetooth to turn Bluetooth on or off.
Note: Turn off Bluetooth when not in use to conserve battery power, or in places where using a wireless
phone is prohibited, such as aboard an aircraft and in hospitals.

Pair Bluetooth Devices

Search for and pair nearby Bluetooth devices. Registered Bluetooth
■
Enable the Bluetooth function on the Bluetooth devices being paired beforehand.
To pair Bluetooth devices:
1. From home, tap Apps
 The Bluetooth settings open.
2. If Bluetooth is not turned on, tap the slider to turn Bluetooth on.
 Nearby devices appear in the "Available devices" list.

If a target device is not detected, tap Menu
3. Tap a device from the "Available devices" list, and follow the onscreen instructions to pair with the
device.
 The Bluetooth device is paired to your phone.

Methods to accept a Bluetooth connection differ depending on the devices used.
Unpairing from a Paired Device
1. From the Bluetooth settings menu, tap Settings
2. Tap FORGET.
 The device is unpaired from your phone. To make another connection with the device, you will
need to pair again.
> Settings > Bluetooth.
> Refresh to search again.
®
devices can be connected simply.
next to the paired device you wish to unpair.
57