C-130 model. It is also compatible with other makes of microphones. By virtue of its wide frequency response and low noise level, the PA-13 is ideal for precision applications. Because of its low output impedance the PA-13 allows to use long cables. The PA- 13 has a high input impedance that makes the microphone not to charge.
3. USES • Acoustic precision measurement with ½” polarized microphones. • The general use of the PA-13 is conditioning the signal from ½“ microphones with a high input impedance and delivering this signal with a low output impedance for connecting to conditioning amplifiers or analysers.
LEMO connectors fits. 6. PRECAUTIONS When using the PA-13, be careful with the next points: • To screw or unscrew the microphone into position use only your hands (no tools). Do not do it while the PA-13 is feeding it.
PA-13 User’s manual LEMO 7 pins Type of connector: FGGIB307CNAD62 1: Without connection 2: Microphone plateholder 3: Vpol Pin connection (pin front view): 4: Signal 5: Vcc 6: Without connection 7: GND Type of microphone: ½" polarised ( C-130) Length of the extension cable available:...
9. STANDARD Normas instruments S.L. as manufacturer of electric or electronic equipment gives notice that the product you have purchased was put on the market later than 13 August 2005 and complies with 2002/96/CE and 2003/108/CE directives on Waste from Electrical and Electronic Equipment (WEEE). In addition, the product is marked with the following symbol, which indicates that it is subject to separate collection.