Philips CPWBS054 Firmware Update Instructions page 3

How to upgrade the SNA6500 Wireless Base Station firmware
3. How do I know which firmware version I have in my SNA6500?
Make sure your PC is connected to your Wireless Base Station (either by Wi-FI or by Ethernet)
3.1 Determine the IP address of your SNA6500 Wireless Base Station.
Click on your PC Start => Run
Type cmd and click OK.
type ipconfig followed by Enter.
The Default Gateway shows the IP address of the Wireless Base Station (192.168.2.1 in this example).
Page 3 of 8