Operating Instructions; The Use Of Remote Control - AOC LC32W033M Service Manual

2. Operating Instructions

2.1 The Use of Remote Control

Button
(Standby/On)
TV/AV(S-video)/
HDMI(PC)/
YPbPr/Component
0-9
-/--
Back
VOL -/+
Source
Mute
CH-/+
/ / /
OK
Zoom
MENU
Display
Sleep
FREEZE
Picture
5
Description
Switch the TV to standby if it is on.
Switch on the TV if it is in standby.
Short cut key for selecting a variable input sources.
Press any number key among 0-9 to select desired
TV channel.
Fast access to multi digit channels like ch24, ch95,
ch139 etc. Press the key and then input a number.
Press this key to go back to the last TV channel or
input source.
USB: Used to switch into folder for music playback.
Press to adjust the volume.
Press this key to show the table of available input
sources.
Note: Not available when the input source is USB.
Press this key to mute or un-mute sound.
Press to select the previous or next TV channel.
Press the up/down/left/right arrow keys
respectively to select available options or adjust
the OSD menu settings.
Multimedia:
Use left/right keys to switch between previous/next
pictures while playing a slideshow or Switch
between previous/next tracks when playing an
audio file.
TV: Use up/down key to change channels. Use
left/right key to change volume.
Press the OK key to confirm your selection or to
adjust the OSD menu settings.
Multimedia: Press OK or
to play/pause the slide show and music playback.
Change the picture aspect ratio.
Press Menu key to display/close OSD menu or
return to previous OSD menu.
Multimedia: This key is used for the Exit function.
Press to display the current signal information.
Multimedia: Press to display the JPEG in full
screen.
Press repeatedly to cycle through the available
sleep timer from 0~180 minutes.
Sleep timer can be set to 5, 10, 15, 30, 45, 60, 90,
120, 180 minutes.
Freeze or unfreeze the screen when RF/AV/YPbPr
inputs are selected.
Note: Play back will not be paused only screen will
be frozen Input signal of 1080P resolution does not
support this feature.
Press repeatedly to select required pre-defined
picture modes.
Note: Not available in for USB input.
START/PAUSE key