Table of Contents
Advertisement
33 / 58
The I2C interface is an easy way to test the I2C connection between the
module and the user's electronic. The user has to choose between an I2C
Read or Write operation.
In Write mode, the bytes (in hexadecimal like 41 42 45 separated by
spaces!) must be written in the dedicated line and the I2C address in the
dedicated Address space (in hexadecimal or in decimal). Then click "Send".
In Read mode, the steps are the same except that the user must specify how
many bytes have to be read. Data to write is optional (only used for
ReadAfterWrite I2C method).
FMod-TCP User Manual v.2.8
Advertisement
Table of Contents
