Disassembly and Assembly Instructions
1
) Detach the slide FPCB connector, volume
5
key / camera key FPCB from the front ass'y
1) Beware that you do not damage PBA.
1
) Detach the slide FPCB from the front
7
1) Beware that you do not damage Slide FPCB
SAMSUNG Proprietary-Contents may change without notice
This Document can not be used without Samsung's authorization
1
) Release screw 3 point at shield can
6
1) Disassembled PBA and front ass'y
1
1) Beware that you do not damage PBA.
1
) Slowly and cautiously, detach the slide
8
FPCB
1) Beware that you do not damage Slide FPCB
11-2
2