Thank you for buying a PanelPilot compatible display. This quick start guide provides the basic information on the use of your product. Getting to know your display All PanelPilot compatible displays share the following features: Mounting bezel TFT/touch screen Back plate...
Getting Started Use the table below to determine which type of user you are, then follow the steps that follow to get started: Pre-configured display - no software install Basic Connect to application using screw terminals User Mount in panel Use software to configure and customise display Intermediate Connect to application using screw terminals...
It can then be downloaded to your display for use in your application. Download and Install PanelPilot 1) Visit www.panelpilot.com/downloads/ and click on the “Download Software” button to begin download. 2) When prompted (above left), click “Run” to begin download and installation.
Page 5
6) Click ‘Install’ to begin installation process (above left). When prompted, click ‘Continue Anyway’ (above right). PanelPilot 7) When installation is complete click ‘Finish’ to quit installer. You can begin using the PanelPilot software by clicking on the desktop icon (shown above).
Further Information Visit www.panelpilot.com for further information on the PanelPilot platform and to download a datasheet for your particular display which includes specific information about pin configurations, wiring instructions and mounting method. Copyright Lascar Electronics Ltd. 2010...