Philips Stremium Wireless Music Station WAS6050 Quick Start Manual page 6

Project8 15-02-08
Connect
2
Connect the Station to the power supply
A
B Connect the Station to a home network / PC
This section describes the simplest way to set up a wireless connection between the Station and
your home network / PC.
When you connect the Station to a network
• You can use the Internet Radio feature
• You can connect to the Internet for firmware updates
• You can transfer music from a PC hard disk to the Station
Connection example:
www
This is the most commonly used home network setup.Your home network may be
protected, hold ready your network password or the encryption key.
1 Ensure the Station is turned on.
2 Press MENU.
3 Select Settings > Network >
• Wireless (if your router has 802.11b/g wireless feature)
• Wired (if you use an Ethernet cable to connect the PC or network device to your home
network)
> Station shows list of networks in range.
3 or 4, then
4 Press
5 Press alphanumeric buttons to enter encryption key (if you are asked to do so), then 2.
6 Select
• Automatic, if your router is capable of serving IP addresses and network settings (DHCP
enabled).
• Static, if you have to enter IP addresses to introduce new devices in your home network.
> The display shows: Apply Settings?
7 Select Yes.
2
8 Press to complete the configuration process.
3
10:33 Page 3
Router
Wireless /
Wired
2
to select your home network.