Table of Contents
Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Mixcder ShareMe 5
Summary of Contents for Mixcder ShareMe 5
- Page 1 User’s Manual MODEL:ShareMe 5 Wireless Headphone...
- Page 2 Built-in rechargeable battery provides more music playing and standby time. ShareMe 5 also can be used both wired and wirelessly via Wireless 4.1 to communicate with your Wireless- enabled device till 10 meters range. ShareMe built-in technology allows listening to the wireless music between 2 ShareMe-equipped headphones simultaneously.
- Page 3 4. Charging the Battery Connect the micro USB charging cable to any power source and the USB interface located on the side of ear cup for charging. The headphone LED turns to solid red during charging. It takes about 2 hours for the first charge and after charging for as long as 1-1.5 hours.
- Page 4 4. Start Wireless function on your phone and search for new devices. 5. Select the “Mixcder ShareMe 5” to pair. Once successfully paired, the LED turns to solid blue. You will hear “Pairing successful, connected”. 5-3 ShareMe function...
- Page 5 5-4 Connecting to paired devices 1. Mixcder ShareMe 5 will pair with the last paired device automatically when turning on. But for some computers or laptops you will need to manually pair every time.
- Page 6 The primary headphone The Wireless-enabled device Connected firstly Connected next The secondary headphone 3. Conversely, if you use ShareMe function to turn the secondary headphone on firstly, it will be connected to the paired device automatically. Then turn the primary one on, the secondary one will disconnect to the paired device and transfer the connection to the primary one automatically.
- Page 7 ShareMe function. 7. Using a Wired Headphone The ShareMe 5 provides a 3.5mm audio jack located on the side of ear cup and an included audio cable for wired use. This allows you to use the audio function with other devices without having wireless function.
- Page 8 Using as a wired headphone with a 3.5mm audio cable 8. Take Care Your Headphone - Store the Headphone with power off and in a dry environment. - If you don’t use the headphone for a long period, charging the battery every 2 months for 1-2 hours. - Use a dry cloth for cleaning if needed.
- Page 9 The “*” is available to the primary headphone with enabled ShareMe function. Note: ShareMe 5 will pair with the last paired device automatically when turned on. But for some computers or laptops you will need to manually pair every time.
- Page 10 11. Troubleshooting Q: The headphone cannot be turned on. A: The battery may be flat. Please recharge the battery and try again. Refer to chapter 4. Charging the Battery. Q: Why doesn’t the headphone pair with the mobile phone? A: Please check the followings. - Check that the headphone is charged and is in pairing mode.
- Page 11 Wireless devices, it cannot search and pair effectively. Or your mobile phone and computer are already connected to many other devices. Try removing some connections before searching the headphone. 12. Warranty The ShareMe 5 is covered by a 1-year manufacturer warranty. For more information, visit www.ausdom.com/warranty. EN-10...
-
Page 12: Specifications
Transmission 2.402GHz-2.48GHz frequency Wireless Spec. Support profile HSP/HFP/A2DP/AVRCP Sensitivity -92dBm Pairing name Mixcder ShareMe 5 Built-in 400mah rechargeable Battery type lithium battery Charging port Micro USB About 16 hours talking/About 14 Running time hours music playing time Battery Spec.
Need help?
Do you have a question about the ShareMe 5 and is the answer not in the manual?
Questions and answers