Play From Bluetooth-Enabled Devices; Play From An External Device - Philips DC395 User Manual

Play from Bluetooth-enabled
devices
Note
•
The effective operation range between the unit and
your Bluetooth enabled device is approximately 10
meters (30 feet).
•
Any obstacle between the system and the device can
reduce the operational range.
•
Compatibility with all Bluetooth devices is not
guaranteed.
PHILIPS DC395
1
Press /SOURCE repeatedly to select the
Bluetooth source.
» The Bluetooth indicator flashes blue.
2
On your device that supports Advanced
Audio Distribution Profile (A2DP), enable
Bluetooth and search for Bluetooth devices
that can be paired (refer to the user
manual of the device).
3
Select 'PHILIPS DC395' on your Bluetooth
enabled device and if necessary input
'0000' as the paring password.
» After successful pairing and connection,
the Bluetooth indicator turns solid
blue, and the unit beeps.
10 EN
PIN
0000
4
Play audio on the connected device.
» Audio streams from your Bluetooth
enabled device to this unit.
Tip
•
The unit can memorize up to 8 previously connected
Bluetooth devices.
To pause/resume music play:
• Press and hold
To disconnect the Bluetooth-enabled
•
device:
• Deactivate Bluetooth on your device;
• Press /PROG/SCAN; or
• Move the device beyond the
communication range.
To clear Bluetooth pairing history:
• Pressand hold both
/PROG/SCAN for 3 seconds.
» The current Bluetooth connection is
disconnected.
» 'RESET' is displayed.

Play from an external device

You can also listen to an external audio device
through this unit.
1
Press /SOURCE repeatedly to select the
AUDIO IN source.
2
Connect a 3.5mm audio link cable (not
supplied) to:
• the AUDIO IN socket (3.5mm) on the
back of the unit.
• the headphone socket on an external
device.
» The text message [AUDIO IN] scrolls
on the screen with display of the date
and time.
3
Start to play the device (see the device
user manual).
/DOCK 2.
/SET TIME and