Technical Data - Philips SA2200 User Manual

Audio player
Hide thumbs Also See for SA2200:
Table of Contents

Advertisement

6 Technical data

Power
• Power supply: AAA alkaline battery*
Display
• Picture / Display: Mono display, 32 x 128
pixels
Sound
• Channel separation: 35dB
• Equalizer settings: Rock / Jazz / Pop /
• Frequency response: 80-18000Hz
• Signal to noise ratio: > 80dB
• Output Power (RMS): 2x3mW
Audio Playback
• Compression format: MP3 (8-320 kbps
and VBR; Sample rate: 8, 11.025, 16,
22.050, 24, 32, 44.1, 48kHz),
WMA (64-320kbps)
• ID3-tag support: Song title and artist name
Recording
• Audio Capturing: Built-in microphone
(Mono)
Storage Media
• Built-in memory capacity:
SA220X 512MB NAND Flash +
SA221X 1GB NAND Flash +
SA222X 2GB NAND Flash +
Connectivity
• Headphone 3.5mm, USB 2.0++
Music transfer
• Drag and drop in Windows Explorer
* Battery life vary by use and settings.
+ 1MB = 1 million bytes; available storage capacity will be less.
1GB = 1 billion bytes; available storage capacity will be less.
Full memory capacity may not be available as some memory will be reserved for the player.
Storage capacity based on 4 minutes per song and 64kbps WMA encoding.
++ Actual transfer speed may vary based on your operating system and software configuration.
Classical / Off
System Requirements
• Windows® ME, 2000 or XP
• Pentium Class 300MHz processor or
higher
• 128MB RAM
• 500MB hard disk space
• Internet connection
• Microsoft Internet Explorer 6.0 or later
• Video display card
• Sound card
• USB port
17

Advertisement

Table of Contents
loading

Table of Contents