Able Planet LINX AUDIO User Manual page 5

3
EXPLANATION OF CONTROLS (Fig. 1)
TRANSMITTER
1) Power On/Off switch turns on transmitter.
2) 8 high-power INFRARED LEDs transmits signal to headphones for optimum room coverage.
3) DC INPUT JACK inputs DC power to transmitter.
4) RCA JACK input audio signal for channel A.
5) MINI PLUG JACK input audio signal for channel B.
NOTE: For TV use, channel B connect RCA JACKS of TV and MINI PLUG to TRANSMITTER.
For HI-Fi use channel A connect MINI PLUG to Hi-Fi and the RCA PLUGS to TRANSMITER.
POSITIONING TIPS FOR TRANSMITTER
• Place thr Transmitter's infrared Window towards the central direction of your listening area.
• Because Infrared Signals travel in straight lines, the Transmitter should be at the same height or
slightly lower than the expected height of the users Headphones.
• Sunlight and strong light sources, such as incandescent indoor lighting may degrade the audio
signal and cause interference. If such problems occur, simply move the transmitter to a darker area.
• Avoid placing the Transmitter towards room windows, as the infrared rays may escape instead of
reflecting off the walls of a room.
Note: For optimum operation within the room, infrared light reflects best on light colored surfaces.