Philips PSA200 User Manual page 11

1
turn on your computer.
2
connect the supplied usb cable to your computer's usb port.
press 4 (on the back of the psa) to open the bat-
3
tery compartment. connect the other end of the
usb cable to usb, (found inside the battery com-
partment.)
psa display:
buttons on the psa are automatically locked during
usb connection.
4
wait for a few seconds for your computer to detect your psa.
your psa appears as a removable drive on your computer.
note:
– no battery is required in your psa during USB connection, unless you are prefor-
ming an upgrade for your psa.
– appears automatically upon connection. there is no need to switch on
your psa.
appears.
connecting psa to your computer 11