Page 2
Such war- ranty shall not apply to any product or component (A) repaired or altered by anyone other than Ultra Stereo Labs or an authorized service contractor; (B) tampered with or altered in any way or sub-...
Use lens cloth for lens cleaning. • Do Not Push Objects Into Opening of this Product. Never insert objects into the product through open- ings. • Do Not Operate In Wet or Damp Conditions. ULTRA STEREO PSA-200 Instruction Manual Page 4 2nd Edition. January, 2000...
Software diskettes/CD ROM components of the projected image. The Manual PSA-200 can also be used as a spot meter. The standard luminance range is from three OPTIONS to 30 foot-Lamberts (10-100 candelas/ square meter). With the addition of an op-...
Cable Power Connector Power Adaptor Tripod INSTALL DISK ONLY PSA-200 Laptop Software Windows 95/98 Version 0.23 Copyright USL, Inc. 1999 PSA SERIAL # Test Film CD ROM Software (Optional) ULTRA STEREO PSA-200 Instruction Manual Page 6 2nd Edition. January, 2000...
3. The “Vppro95” folder will appear. Click quired to install the operating software. The on the Vppro95 folder to open it. first is to install the PSA-200 application 4. There are three setup icons. Double program; the second installs the drivers for click on the setup icon showing a com- the PCMCIA video card.
(The PSA-200 camera should be positioned at least one screen width back from the screen.) If the camera is set up in the pro- jection booth, looking through the projec-...
Page 9
(see Fig. 3). It NOTE: The PSA-200 and laptop computer should look centered on the laptop require a warm-up period of at least two computer screen. The image of the...
OPERATION This section describes the operation of the side the image and not in the darker bor- PSA-200 in detail. It is organized by specific der surrounding it in order for a manual activity for easy reference. These activities alignment border to work.
Page 11
(Fig. 5) Spot Meter Checking Weave and Jitter (Optional Feature) The PSA-200 measures picture steadiness (Fig. 6) SMPTE Test Pattern in terms of Weave and Jitter (or Jump). Weave is the residual horizontal motion of a projected image. Jitter is the residual ver- 3.
Page 12
Fig. 8) The graphs display amplitude vs. frequency of the spectral compo- nents as a troubleshooting aid. As the PSA-200 analyzes the image motion and accumulates more data, the accu- racy of the readings increases. After approximately two minutes, the soft- (Fig.
(Fig. 10b) Report - Bottom of the report. The Cancel button deletes all of the text of the report and returns to the PSA-200 report screen. (Fig. 11) Report Edit 2nd Edition. January, 2000 Page 13 ULTRA STEREO PSA-200 Instruction Manual...
(provided by where the PSA-200 files are stored. Double- contacting USL) into the dialog box to imple- click on the PSA-200 folder or other direc- ment software upgrades. tory and folder (where files are saved). Se- lect the .rpt file to be deleted, then press...
Lays out data in a row of 45 cells as MS-Excel). This file handling feature (instead of 9 x 5 cell matrix). couples the PSA-200 cinema analyzer to the power and utility inherent in database “Insert field names in database.”...
“Device Manager’ if a problem occurs during the installation or operation of the PSA-200 system. 1. Verify you have installed the PSA-200 software before you inserted the PCMCIA card. If you did not, proceed to step 4.
Page 20
PSA soft- ware. The PSA-200 should now work prop- erly, if not: 5. Make sure the Windows operating sys- tem is located in C:\Windows and the USL support files are as follows: The “Ms80x.inf” driver is in the “C:\Windows\Inf”...
Page 21
6. 6. Check your “Card Services Software”. If Card services or another third party PCMCIA slot manager is present, the PSA-200 capture card may have prob- Fig. 20 lems being identified by the Windows operating system. The PSA-200 Video F.
Page 22
PCMCIA control panel first. I. Re-insert the PSA-200 PCMCIA card and confirm the driver information by opening CardSoft. The screen should no longer have the question mark and the driver will be properly identified (see Fig.
Page 23
P. Windows will prompt you to click “Finish” to enable 32-bit support. Click “Finish” and follow the instructions to turn your com- puter completely off. Q. Check to ensure your PSA-200 2nd Edition. January, 2000 Page 23 ULTRA STEREO PSA-200 Instruction Manual...
Page 24
PCMCIA card you identify and resolve conflicts be- is fully inserted in the card slot. Restart your tween your PSA-200 Video Capture computer, and then restart the PSA pro- card and other devices in your system.
Page 25
Fig. 29 appears again, try using the Manual Alignment function. If you cannot fix the problem, call us for technical support. Fig. 29 2nd Edition. January, 2000 Page 25 ULTRA STEREO PSA-200 Instruction Manual...
Need help?
Do you have a question about the PSA-200 and is the answer not in the manual?
Questions and answers