Table of Contents
Advertisement
These instructions should be read carefully and left with the user of the product for future reference.
Before use please Inspect the product including its cable and plug for any signs of damage. If the product
is damaged, DO NOT use it, and contact your supplier immediately.
1. Place the humidifier on a flat surface, about 60cm away from the floor and 10cm away from the wall.
We recommend you do not place the humidifier directly on to wooden furniture.
2. Make sure the unit is switched off and disconnected from the electrical outlet.
3. Using the handle on the rear of the unit lift the water tank up and off the base.
4. Remove the water tank cap from the underside of the water tank by turning anti-clockwise.
5. Fill the water tank with cool, fresh water. Do not use warm or hot water as this may cause the unit to
leak.
6. Replace the water tank cap by turning clockwise and replace the tank on the base.
7. Water will begin to flow from the tank into the base.
8. Plug the power cord into an electrical outlet.
Please Note
The unit should not be used without the mist
outlet in place as this can lead to false humidity
level readings.
The features and settings of this unit are explained on the next page.
IMPORTANT
Installer and Users please note:
OPERATING INSTRUCTIONS
2
Ver 1 01/2015
Advertisement
Table of Contents
