Repair The Player Through Philips Songbird - Philips GOGEAR SA3VBE04 User Manual

15 Repair the
player through
Philips Songbird
If VIBE is not working properly or the display
freezes, you can reset it without losing data:
To reset VIBE?
• Insert a pen tip or other object into the
reset hole located at the base of VIBE.
Hold until the player shuts down.
If you fail to reset the player, repair the player
throughPhilips Songbird:
1
On your PC, launch Philips Songbird.
2
In Philips Songbird,
• select Tools > Repair my Philips
Device;
• select VIBE in the pop-up list.
3
Connect the player to the PC.
• Make sure that you follow the
onscreen instructions on how to
connect the player to the PC.
4
Follow the onscreen instructions to
complete the repair.
Tip
•
After you repair the player, the CD-ROM
partition and the Philips Songbird installer
are removed from the player. More space is
available on the player.
EN 43