Advertisement
acacia
BATH CABINET
left and right
side panels
NOTE: Do not overtighten screws
Insert 4 wood dowels, 4 cam screws, and 4 cams
into left and right side panels as shown. Make
sure arrows on each cam points toward nearest
edge with holes as shown. Secure, but do not
1
overtighten, screws with a phillips head
screwdriver.
Attach each leg to bottom panel with 4 bolts
3
using a phillips head screwdriver.
Made in Vietnam - r05
NOTE: Make sure arrows
on each cam points towards
nearest edge with holes
bolt
leg
bottom panel
Customer Service 800.606.6252 | Latest instructions available at www.cb2.com
A
top panel
B
fixed shelf
A. Insert 4 cam screws and 4 wood dowels into
top panel as shown.
2
B. Insert 4 cams into each fixed shelf.
bottom assembly
Insert 4 cam screws and 4 wood dowels into
4
bottom assembly as shown.
Page 2 of 5
Advertisement
