Technical Data - Philips GoGear SA1102 User Manual

Technical Data

Power supply
Picture / Display
Sound
Audio Playback
Compression format
ID3-tag support
Audio Capturing
Storage Media
Connectivity
Music transfer
System Requirements
* Battery life varies by use and settings.
** 1MB = 1 million bytes; available storage capacity will be less.
1GB = 1 billion bytes; available storage capacity will be less.
Full memory capacity may not be available as some memory will be reserved for the player.
Storage capacity based on 4 minutes per song and 64 kbps WMA.
+ Actual transfer speed may vary based on your operating system and software configuration.
10
AAA alkaline *
Mono display, 32 x 128 pixels
Channel separation
Equalizer settings
Frequency response
Signal to noise ration
Output Power (RMS)
MP3 (8-320 kbps and VBR; Sample rate: 8, 11.025, 16, 22.050, 24, 32, 44.1, 48kHz)
WAV
WMA (5-192kbps)
Song title and artist name
Built-in microphone
SA110X 512MB NAND Flash **
SA111X 1GB NAND Flash **
Headphones 3.5mm, USB 2.0 +
Drag and drop in Windows Explorer
Windows® 98 SE, Me, 2000 or XP
Pentium Class MMX 166MHz processor or better
96MB RAM
50MB hard drive space
Internet connection
Microsoft Internet Explorer 5.5 or later
Video display card
Soundcard
USB port
40dB
Rock / Jazz / Pop / Classical / off
30-18000Hz
>85dB
2 x 5mW
Mono