Advertisement
UK
Operation
Remove the appliance from the
1.
packaging. Make sure that all protective
plastic film and plastic coatings are
thoroughly removed from all surfaces.
Note: Before using for the first
time, clean the interior of the
appliance and all parts in
warm soapy water, then rinse
thoroughly.
Ensure the Temperature Control knob is
2.
set to '0'.
Remove the lid and fill the appliance to
3.
at least half of its capacity. Do not
exceed the Max fill line
Place the food to be steamed in the removable stainless steel basket
4.
Replace the lid.
5.
Connect to the mains power supply and turn the power switch On. The Power Indicator light
6.
illuminates.
Set the Temperature Control knob to maximum to boil the water. The Heat Indicator illuminates and
7.
the appliance heats the water.
When not steaming food the temperature control knob can be lowered to keep the water warm and
8.
reduce heating times.
WARNING: If the Temperature Control Knob is set to maximum then the appliance will
constantly heat the water until the power switch is turned Off or the temperature is
reduced.
Thermal Cut-Out Reset
This appliance is fitted with a Thermal Cut-Out safety feature. Should the temperature exceed safe levels
the appliance will automatically cut power.
The Safety Cut-out switch resets automatically. To reset the appliance:
Disconnect from mains power supply, empty the appliance and allow to cool.
1.
The appliance is now reset and can be used as normal.
2.
3
Lid
Handle
Temperature
Control knob
Power Indicator light
Advertisement
