3. Press the device
4. Connect the power supply, refer to the section "Power supply (Page 39)".
5. Fit the antennas, refer to the section "Antennas (Page 43)".
Uninstalling
1. Turn off the power to the device.
2. Disconnect all connected cables.
3. Pull the DIN rail slider down with a screwdriver
SCALANCE W778-1 /W738-1
Operating Instructions, 01/2107, C79000-G8976-C450-01
②
against the DIN rail until the DIN rail slider catch locks in place.
4.3 Installation on a DIN rail
①
.
Mounting
29