1. G ENERAL ESCRIPTION 1.1 ES66x8 The ES66x8 Vibratto II processor is a highly integrated single-chip DVD solution that integrates read channel, ECC, Servo DSP, MCU, and MPEG-2/MPEG-4/DivX decoder that has a state-of-the-art 480p/576p progressive-scan video feature to provide brilliant and sharp, flicker-free video output to the display, and with built-in gamma correction and S/PDIF input and output support.
Audio Related Features: − Full DVD-Audio support including MLP and LPCM decode, CPPM decryption, and watermark detection. − Up to 7.1 channel audio outputs . − Bass management. − Dolby Digital ( AC-3 ), Dolby Pro Logic, and Pro Logic II. −...
Page 4
2. System Block Diagram and ES66x8 Pin Description ES66x8 Pin Description...
3. A UDIO UTPUT The ES66x8 supports two-channel analog audio output while ES66x8 supports six-channel analog audio output. In a system configuration with six analog outputs, the front left and right channels can be configured to provide the stereo (2 channel) outputs and Dolby Surround, or the left and right front channels for a 5.1 channel surround system.
The video output section features internal line buffers which allow the outgoing luminance and chrominance data to match the internal clock rates with external pixel clock rates, easily facilitating YUV4:2:2 to YUV4:2:0 component and sample conversion. A polyphase filter achieves arbitrary horizontal decimation and interpolation. Video Bus The video bus has 8 YUV data pins that transfer luminance and chrominance (YUV) pixels in CCIR1656 pixel format (4:2:2).
has sufficient bandwidth to support the decoding and displaying of CCIR1656/601 resolution images at full fra me rate. 7 FLASH M EMORY The decoder board supports AMD class Flash memories. Currently 4 configurations are supported: FLASH_512K_8b FLASH_1024K_8b FLASH_512Kx2_8b FLASH_512Kx2_16b The Vibratto II permits both 8- and 16-bit common memory I/O accesses with a removable storage card via the host interface.
12 C ONNECTORS 12.1 SCART C ONNECTORS Pinout of the scart connector: 1 ? Audio Right Out 2 ? Audio Right In 3 ? Audio Left / Monu Out 4 ? Audio Gnd 5 ? Blue Gnd 6 ? Audio Left / Mono In 7 ? Blue 8 ? Control Voltage 9 ? Green Gnd...
0.4V: driven composite video input signal (pin 19). Left unconnected, pulled termination. 1V to 3V: the TV is driven by the signals Red, Green, Blue and composite sync. The latter is sent to the TV on pin 19. This signal is useful when using a TV to display the RGB output of devices such as home computers with TV-compatible frame rates.
Functional Block Diagram of Switcher 13.2 FRONT PANEL: − All the functions on the front panel are controlled by U1 (ES66x8) on the mainboard. − U1 sends the commands to IC2 PT6311 via socket J2 (pins 3,4 and 5). − There are 48 keys scanning function, 5 LED outputs, 1 Stand-by output and VFD drivers on PT6311.
Page 16
CD Update Procedure of 4250D Download the update file from the convenient link according to your default language choice. While there is no CD in the DVD (No Disc Mode) , press “Menu 1 3 5 7” buttons on the remote control in order to reach the Service Menu of DVD Player: 2.1.
Page 17
Brief Information of Naming the File Software version differs from each other depending on front models. 23xx and 24xx are called Old VFD and 25xx and 26xx are called Mini VFD. Each character in the file name is an abbreviation of a description as illustrated below.
Page 18
Pay attention the left side. Select CD and CD_ROM (ISO) on the upper left side of screen...
Page 24
Click the “New” on the upper right corner of the screen...
Page 25
Select your file from file browser then you will see your file in the “Name” section on the right side and then copy the files to under “Name” section on the left side.(this is just an example you will see your file name when you are doing this process)
Page 26
Click the “Burns the current compilation”...
Page 27
Then you will see this screen and click the “Burn” on the right upper side of screen...
Page 28
You will see this screen and tray will open itself on computer ,then place the CD in CD-ROM And it will start writing. At the end you will see “burn complited”...
Page 31
2.54MM 220UF GNDA 0.1UF VESTEL Title ESS CONFIDENTIAL MISC The information has been checked and is believed to be reliable. However, no responsibility is assumed for inaccuracies. Circuit diagrams are provided as a means of illustrating typical applications; consequently complete information for construction purposes is not necessarily given. ESS reserves the right to make changes at any time in order to improve the design.
Need help?
Do you have a question about the DVD4250D and is the answer not in the manual?
Questions and answers