1. Manuals
  2. Brands
  3. ALLEN LEIGH Manuals
  4. IP Camera
  5. PTZ-IR COWCAM
  6. Instruction manual

ALLEN LEIGH PTZ-IR COWCAM Instruction Manual

Hide thumbs

Advertisement

Table of Contents

Make your analog system
smart phone compatible!!
Watch from the comforts of home or take
your work with you and monitor your system
from your smart phone.
With the DVR & data radio kit you
can have it all.
This kits includes the data radio, 1 receiver,
IP support and DVR
$550 for 2.4ghz system
$600 for 5.8ghz system
Cow Cam Installation Instructions
20
PTZ-IR
Cow Cam Installation Instructions
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PTZ-IR COWCAM and is the answer not in the manual?

Questions and answers

Summary of Contents for ALLEN LEIGH PTZ-IR COWCAM

  • Page 1 Make your analog system smart phone compatible!! Watch from the comforts of home or take your work with you and monitor your system from your smart phone. With the DVR & data radio kit you can have it all. This kits includes the data radio, 1 receiver, IP support and DVR $550 for 2.4ghz system ...
  • Page 2 Thank you for purchasing your PTZ-IR Livestock If you purchased the optional direc- Monitoring System (Cow Cam) from us. You will get many years of use from your new wireless tional High Gain Antenna to get better video system, it comes with a one-year warranty distance, you will want to use the same on parts and labor, and we guarantee it to work guide lines as above.
  • Page 3 There are a few things that will in- terfere with your signal on your Wire- less Livestock System one for sure is the microwave oven when it is in use, and we have also experienced problems with any other 2.4 GHz devices like cordless telephones, wireless routers, wireless internet, Bluetooth and some gaming systems.
  • Page 4 Channel Channel Light Indicator Transmitter Information Selector (Channel 1 is far right) Switch There is no on/off switch for the transmitter or camera; the only way to turn it off is to unplug the unit. We strongly recommend that you unplug the unit after If you unscrew the 4 Philips screws on the front of the your calving season is complete, damage may occur during transmitter you will be able to take the cover off.

  • Page 5: Transmitter Box

    Transmitter Information Transmitter Data Radio Receiver Switch-Craft Connector, Power connect this Cable to the camera cable If you unscrew the 2 Phillips screws on the bottom of the transmitter you will be able to take the cover off. Inside of the transmitter box you will find a series of lights (4) on a small board, these tell you what channel this particular transmitter is on, it can be switched to one of four frequencies.

  • Page 6: Basic Setup Instructions

    289-8164 Thank You and Enjoy! Allen Leigh Security & Communications Team Please note that the controller is not connected to video it controls **Please refer to the next pages if you have pur- camera movement only.

  • Page 7: Outdoor Equipment

    Outdoor Equipment Now that you have the receiver and controller set up, we will now set up the outdoor equipment. Starting with the camera, plug the camera cable into the 6-pin male connecter end on the camera. The other end of the camera cable will be connected to the bottom of the transmitter where there is a 6-pin female connector that it will plug into.
  • Page 8 Creating Preset Location Points Outdoor Assembly: Position your camera on the point of interest that you want Step 1. to view, you can zoom in/out on the object location. Connect everything at the house first to make sure everything Once you have your location determined, on the Controller ...
  • Page 9 Programming / Camera Operations Zoom in / Zoom out Turn the joystick controller knob counter clock- If the Audio Modification Box option was purchased, you wise to zoom out and clockwise to zoom in will have two cable ends, they are setup so that the camera end will Or you can use the “TELE”...
  • Page 10 Picture Problems If you do not get a picture right away, upon your complet- Trees, shrubs and hay bales do not seem to hin- ing your connection you may have to unplug and plug the trans- der the picture quality too much during the winter, mitter back in, this does a system reset, and usually rectifies the trees do effect the signal once the leaves come out.

Table of Contents