Controls - Kenwood X-SE7 Service Manual

www.freeservicemanuals.info
(X-SE7)
1
2
3
1 Tape tray
Load a cassette tape here.
2 "on/standby" key/indicator
Press to turn the power on/off (standby). This key is not
used when the unit is connected using the system
connection.
3 Dolby NR key/indicators
Press to switch the Dolby Noise Reduction on/off.
4 Play (2 3) keys/operation indicators
During stop and pause: the tape direction lights red.
During playback and recording: the tape direction lights
green.
During fast forward and rewind: the tape direction
flashes green.
(X-SE9)
1
2
3
1 Tape tray
Load a cassette tape here.
2 "on/standby" key/indicator
Press to turn the power on/off (standby). This key is not
used when the unit is connected using the system
connection.
3 Dolby NR key/indicators
Press to switch the Dolby Noise Reduction on/off.
4 Play (2 3) keys/operation indicators
During stop and pause: the tape direction lights red.
During playback and recording: the tape direction lights
green.
During fast forward and rewind: the tape direction
flashes green.

CONTROLS

X-SE7
stereo auto reverse cassette deck
- front loading mechanism -
"
rev. mode
B C Dolby NR CRLS
on/standby
X-SE9
stereo auto reverse cassette deck
- front loading mechanism -
"
rev. mode
B C Dolby NR CRLS
on/standby
World of free manuals
X-SE7/SE7(G)/SE9
2 3
0 7
8
1 ¡
¶
5 Open/close (0) key
Press to open the tape tray when loading or
unloading tape.
6 Stop key (7)
7 Pause (8) key/indicator
8 Record (¶) key/indicator
Press to start recording. When pressed during recording,
the tape stops after leaving a non-recorded section
(blank) of about 4 seconds.
9 Fast forward and rewind (1 ¡) keys
0 "rev. mode" key/indicator
Press to switch the tape reverse mode (two-way or one-
way) of the deck.
! CRLS key/indicator
Press to set the recording level automatically according
to the recorded music source.
2 3
0 7
8
1 ¡
¶
5 Open/close (0) key
Press to open the tape tray when loading or
unloading tape.
6 Stop key (7)
7 Pause (8) key/indicator
8 Record (¶) key/indicator
Press to start recording. When pressed during recording,
the tape stops after leaving a non-recorded section
(blank) of about 4 seconds.
9 Fast forward and rewind (1 ¡) keys
0 "rev. mode" key/indicator
Press to switch the tape reverse mode (two-way or one-
way) of the deck.
! CRLS key/indicator
Press to set the recording level automatically according
to the recorded music source.
1/7/2013
4
5
6
7
8
9
0
!
4
5
6
7
8
9
0
!
3