iLiving i3 User Manual page 27

To charge the battery on your scooter, first make sure that the key is inserted and
the scooter is turned on. Check to make sure that the battery selection switch is
turned toward the battery that needs to be charged.
Next, fully insert the charger head into the scooter charging port on the scooter and
insert the electrical plug head into a 110/120V outlet. This scooter's AC Charger
has a three-pronged plug that plugs directly into a 120V outlet.
On the scooter, the charging port is right above the left tail-light. To avoid dust and
dirt entering the charging port, there is a cover over the port. Use your finger to
slide the cover open. See illustrations below:
Once the charging port cover is open, plug the charger head fully into scooter's
charging port as far as it will go. Then, plug the electrical head into a 120V outlet.
See illustrations below: