Redback A 1741 Operating Manual page 6

Step 3: Open folder named "trig1" and you should get a window that looks like figure 7.
Fig 7
Step 4: You should see an MP3 file XXXXXX.MP3 if you have never changed the trigger1 MP3 file then it will be named
Trigger1.MP3.
This MP3 file needs to be deleted and replaced by the MP3 file you want to play when you activate trigger1. The MP3
file name is not important only that there is one MP3 file in the trig1 folder. Make sure you delete the old MP3!
The folder should look something like figure 8.
NOTE the new MP3 file cannot be "Read only" to check this right click on the MP3 file and scroll down
and select Properties, you will get a window that looks like figure 9. Make sure the "Read Only" box has
no tick in it.
Redback® Proudly Made In Australia
6
Delete this le
and replace it
with a new MP3
Fig 8