Advertisement
Quick Links
GT-4160
720p HD FPV
4 Channel RC
1
Quadcopter Overview
2
Remote Control Overview
3
Headless Mode Explained
4
Remote Control Battery & Pairing
5
Remote Control Mode
FPV Screen
6
Rotor Guards & Landing Struts
7
8
Charge the Quadcopter
Preparation and Pairing
9
Flight Control and Trim
10
11
360° Flip
Troubleshooting
12
Parts List
13
Quadcopter
Advertisement
Related Manuals for RCTECH GT-4160
Summary of Contents for RCTECH GT-4160
- Page 1 GT-4160 720p HD FPV Quadcopter 4 Channel RC Quadcopter Overview Remote Control Overview Headless Mode Explained Remote Control Battery & Pairing Remote Control Mode FPV Screen Rotor Guards & Landing Struts Charge the Quadcopter Preparation and Pairing Flight Control and Trim 360°...
-
Page 2: Remote Control Overview
1. QUADCOPTER OVERVIEW Propeller Blades (Rotors) Main Shell Motor Rotor Guard 2. REMOTE CONTROL OVERVIEW... - Page 3 Antenna Transmission Light Control Turn ON/OFF LED Lights on quadcopter Power LED Indicates ON/OFF Power Switch Turn ON/OFF the remote control Flip Button Perform 360° flip Throttle Stick / Left & Right Turn Stick Ascend & descend / Turn left & right Direction Control Stick Move forward, backward, left &...
- Page 4 4. REMOTE CONTROL BATTERY AND PAIRING Slide open the battery cover on the back of the Battery Cover remote control. Insert 4 x AA sized batteries in the polarity as shown on the inside of the battery compartment. Batteries of different type are not to be mixed.
-
Page 5: Fpv Screen
6. FPV SCREEN This quadcopter is equipped with a 720P HD camera and transmits live images to the 14.33cm FPV screen via 5.8GHz. To use the FPV screen, please first charge the FPV screen using the supplied USB Charger. Once fully charged (the red light on the charger turns on, charging time about 100 minutes), attach the antenna on the top right hand corner. - Page 6 7. ROTOR GUARDS AND LANDING STRUT 1. Included in the package you will find a screw driver, 2 x landing struts and 4 x rotor guards. 2. The 2 x landing struts will fit into the pre-drilled holes on the bottom of the quadcopter, use the screw driver to tighten the screws.
- Page 7 10. FLIGHT CONTROL AND TRIM ASCEND Use the throttle stick to ascend or descend. Push the throttle & upwards to increase throttle and downward to decrease throttle. DESCEND TURN Use the throttle stick to turn left or right. Push the throttle LEFT &...
-
Page 8: 12. Troubleshooting
12. TROUBLESHOOTING LED indicators remains flashing on the 1. Pairing between the remote control 1. Repeat the pairing steps. quadcopter after powering on. and quadcopter was not successful. 2. Charge battery. 2. Battery is near depletion 1. Propeller blades damaged. 1.
Need help?
Do you have a question about the GT-4160 and is the answer not in the manual?
Questions and answers