HOW TO USE
Charging Your Hair Clipper
•
The hair clipper must be turned off.
•
Insert the adapter plug into the bottom of the hair clipper and plug the
adapter unit into a power outlet. The amber light will glow to indicate that it
is charging.
•
The hair clipper will be fully charged in 14-16 hours.
•
The batteries cannot be overcharged, but we recommend that charging be
discontinued if the hair clipper will not be used for a long period of time.
•
It is advisable not to use this hair clipper directly from the power outlet
when it has been fully charged, but if while using the hair clipper in
cordless mode there is a noticeable drop in power, you can use directly
from the power outlet.
•
Never use under water when connected to the outlet.
•
If the hair clipper has not been used for a month or longer, it is advisable to
recharge it for 14-16 hours.
•
To preserve the life of the batteries, discharge them by running the hair
clipper until the blades move slowly. Switch off and fully recharge. Do this
every six months.
•
Charge the clipper at temperatures between 4º-32ºC.
•
Nickel-Metal Hydride batteries are included.
USB charging
This hair clipper can be charged via USB port on a PC. Do not run the product
when charging via USB port on a PC.
Integrated Hair Texturisor
•
Simply adjust the hair texturisor/thinner mechanism by sliding the button at
the top of the hair clipper.
•
Cut hair to desired length.
•
Slide Texture Release button into place, exposing hair texturisor.
•
Repeat hair cutting technique in areas you desire to be texturised.
6