Advertisement
Using the Water Flosser:
Hold the unit in an upright position with nozzle tip point toward your teeth
Keep your mouth opened slightly so that the water can flow out.
Press "On/Off" key to start irrigating. (Fig. 6)
1).
Directing the water jet flow at a 90-degree angle to the teeth and gums
2).
Directing the water jet slowly along the teeth
3).
Directing the water jet along the gum line with the nozzle tip at a 90-degree angle to the gum tissue
4).
Cleaning between the teeth and around any braces, crowns or bridgework thoroughly.
Press"On/Off"key and then press the nozzle release button to replace other nozzle when you need.(Fig.7)
Once irrigating complete, press "On/Off" button again to turn off the device.
1.Open the water tank cap and dispose of the water in the tank.
2.Press "On/Off" key to turn on the unit, and drain the water inside the appliance.
3.Press "On/Off" key again to turn off the unit, and close the water tank cap.
4.Wipe the device with dry cloth.
Advertisement
