Samsung GT-I9505 User Manual page 82

Media
Configuring settings for Camera
Tap to configure settings for Camera. Not all of the following options are available
in both still camera and video camera modes. The available options vary depending on the
mode used.
Photo size / Video size: Select a resolution. Use higher resolution for higher quality. But it
takes up more memory.
Burst shot: Take a series of photos of moving subjects.
Face detection: Set the device to recognise people's faces and help you take photos of
them.
Metering: Select a metering method. This determines how light values are calculated.
Centre-weighted measures background light in the centre of the scene. Spot measures
the light value at a specific location. Matrix averages the entire scene.
ISO: Select an ISO value. This controls camera light sensitivity. It is measured in film-
camera equivalents. Low values are for stationary or brightly-lit objects. Higher values are
for fast-moving or poorly-lit objects.
Anti shake / Video stabilisation: Activate or deactivate anti-shake. Anti-shake helps
focus when the camera is moving.
Auto night detection: Set the device to automatically detect darker conditions and
adjust the brightness of the photo without the flash.
Save as: Set the device to delete the original photo when taking photos with rich tone
mode.
GPS tag: Attach a GPS location tag to the photo. Activate this feature when taking photos
to create albums in Story Album.
To improve GPS signals, avoid shooting in locations where the signal may be
obstructed, such as between buildings or in low-lying areas, or in poor weather
conditions.
Your location may appear on your photos when you upload them to the Internet.
To avoid this, deactivate the GPS tag setting.
82