Do you have a question about the Algas 40/40 and is the answer not in the manual?
Questions and answers
Summary of Contents for AlgasSDI Algas 40/40
Page 1
Vaporizer Repair and Maintenance Guide Algas SDI 881 HERSEY STREET ST. PAUL, MN 55114 DIRECT FIRED PHONE (651) 646-1177 LPG Vaporizers (651) 646-1676...
Page 2
Installation Example Vaporizer Installation Best Practices The following sketch depicts a typical vaporizer installation. The vaporizer system, when piped as shown, will provide long trouble free vapor service. The vaporizer can be isolated for maintenence or repair without interrupting the load. Although some of the components such as the vapor bypass regulator, the burner supply line and the oil separator are optional, they are all highly recommended as "Best Practice Piping"...
Page 3
Maintenance Schedule Vaporizers and ancillary equipment should be serviced ONLY by trained and fully qualified personnel. This equipment operates with LP gas which FLAMMABLE GAS is flammable and under pressure. Inherent hazards exist and a thorough understanding of the equipment is required for safe maintenance. Monthly Check List Items to Service Monthly Service to Perform...
Page 4
40/40 Parts Repair Parts for Algas 40/40 Vaporizer The Algas 40/40 vaporizer has undergone major improvements and revisions since 2002. The burner assembly, burner regulator and associated supply lines as well as the thermostat control have been updated for more reliable and better performance.
Page 5
80/40 Parts Repair Parts for Algas 80/40 Vaporizer The Algas 80/40 vaporizer has undergone major improvements and revisions since 2002. The burner assembly, burner regulator and associated supply lines as well as the thermostat control have been updated for more reliable and better performance.
Page 6
Kits and Service CAUTION The vaporizer must be completely blown down before performing service. Be sure FLAMMABLE GAS all sources of ignition are extinguished within 25 feet of the work area. Liquid Inlet Valve Capacity Control Kit Remove the plug from the inlet valve and wipe away debris. Disassemble and clean the valve assembly inside the body.
Need help?
Do you have a question about the Algas 40/40 and is the answer not in the manual?
Questions and answers