Tripp Lite WorkWise Owner's Manual page 7

Assembly
7
Lock the position of the Center Rails using eight (8) M6 x 10 Screws
8
Slide the Control Box G
For the leg closest to the Control Box, insert the leg's male cable connector into the Control Box's nearest female input. For the leg
farther away, use the Male to Female Extension Cable
female input found on the Control Box's other end.
Connect the Handset
H
Connect the Power Cord
To prevent cable sag, secure cables using the adhesive-backed Cable Clips
I
into the slots of the Desk Base Assembly.
cable to the Control Box.
to the Control Box.
I
O
G
H
K . Ensure the M6 x 10 Screws contact the Center Rails.
K
to establish a connection between the leg's male cable connector and the
J
O .
J
7