2.3
Input/Output connection
The items may differ from the image
Caution
•
When you connect the signal cables to the input / output terminals, check the above picture of the
input / output terminal, and connect in the right direction. If connected incorrectly, it may cause
damage or breakdown of the input / output terminals.
•
If the product does not operate even though t
power-on or not.
Connector name and description
단 자 명
No.
①
Audio Out
②
Audio In
③
VGA In
④
DP In
⑤
HDMI 1 ~ 4 In
⑥
Service In
⑦
Touch In
⑧
RS232C In
⑨
IR In
⑩
OPS Slot
⑪
AC Power Input
⑫
Internal speaker
2.3.1 55" Monitor with Touch
⑫
⑪
V0.1
shown.
he power is supplied, check if the power switch is set to
To connect audio stereo output (3.5Φ)
To connect audio input (3.5Φ)
To connect VGA video input
To connect DisplayPort 1.2 video & audio input
To connect HDMI 1~2 1.4b video & audio input
To connect with USB device for software update
To connect touch control system.
To connect RS232 input cable with control device (3.5Φ)
To connect external IR receiver
To connect OPS (Open Pluggable Specification) PC.
Power connector (AC 100-240V, 50/60Hz) or
Power Switch (O: AC off, ㅡ: AC on)
max 10W x 2ea
⑩
설 명
(applies only to 84/65/55"monitor with touch)
kit. (3.5Φ)
①
②
⑫
③
④
⑤
⑥
⑦
⑧
⑨
14