Advertisement
Quick Links
4' to 8' Aromatic Cedar Closet
Model # 801
ITEM
1
Tools Required:
Panel & Shelf Identification
24"
18"
DESCRIPTION
Wall Panel
Tower Panel
24" Shelf with Rafix
18" Tower Shelf with Rafix
18" Tower Shelf
51" Max Adjustable Shelf (33"~ 51")
1
PLEASE READ INSTALLATION
INSTRUCTIONS BEFORE ASSEMBLING
IF YOU ARE MISSING PARTS OR HAVE
QUESTIONS PLEASE CONTACT:
customerservice@ cedargreen .net
33" ~ 51"
7" above floor
QTY
2
2
2
3
3
1
Rev. D
72"
Advertisement
Related Manuals for Cedar 801
Summary of Contents for Cedar 801
- Page 1 PLEASE READ INSTALLATION INSTRUCTIONS BEFORE ASSEMBLING Rev. D IF YOU ARE MISSING PARTS OR HAVE 4’ to 8’ Aromatic Cedar Closet QUESTIONS PLEASE CONTACT: Model # 801 customerservice@ cedargreen .net Tools Required: Panel & Shelf Identification 33” ~ 51” 24”...
- Page 2 Hardware Identification Sheet ITEM PICTURE DESCRIPTION Rafix Connector Bolt Wardrobe Tube 3 pairs Support Dry Wall Anchor Flathead Phillips Screw #6 x 1/2" Panhead Phillips Screw #8 x 1" Flathead Phillips Screw #8 x 3/4" Wall Rail 44" Wall Rail 18" Wall Rail Covering Strip 43"...
-
Page 3: Before You Begin Assembly
BEFORE YOU BEGIN ASSEMBLY: Read your instruction manual fully. Check all parts and hardware. If anything is missing or not satisfactory, please DO NOT call the store or return the product to them. Please email to customerservice@cedargreen.net for assistance. Most problems are resolved promptly without you needing to leave home. - Page 4 Mount WALL RAIL (G) from left to right on top of the Horizontal Line. To secure the wall rail onto the wall – Use Panhead Screws (E) on stud reference marks. Mark the screw locations then drill pilot holes using a 1/8” drill bit. ...
- Page 5 Attach the Left Panel Hangers (O) onto the left Wall Panel (1) and left Tower panel (2) by using Flathead Phillips Screws (F), put the Left Panel Hanger (O) at the ½ circle Indent at the top of the Panel, locate the Two pre-drilled Holes just below the Indent.
- Page 6 Insert Rafix Connector (Q) into shelf holes with the openings facing outward. Do this for all shelves (3), (4) and (6). Mount Rafix Connector Bolt (A) on the first holes from top of left Wall Panel (1) and left Tower Panel (2) using Phillips or Power screwdriver. Top holes are used for flat top shelving.
- Page 7 Panhead Phillips Screw (E) and Dry Wall Anchor (C) if necessary. Hint: Suggested Shelf and Wardrobe Tube locations can be changed Customize you closet to meet your need. Now your beautiful new cedar closet is finished, enjoy the aromatic scent.
- Page 8 Be creative with your Cedar Closet System, suggested combinations: Item No.: 801 Aromatic Cedar Closet System by Cedar Green 800-336-4690 www.cedargreen.net...