Download Print this page
cassini C-900M Instructions For The Use

cassini C-900M Instructions For The Use

300x/600x/900x 98pc. microscope kit

Advertisement

Quick Links

All I can see is a partial circle of light. Why?
To see your sample properly, you need to have even light shining up through the
slide. If you are using the mirror for light, try gently moving it about while looking
through the microscope until you see an evenly lit full circle.
I have a very thin sample on my slide, but I can't see any detail.
First, make sure that the image is in sharp focus by adjusting the focusing knobs. If
the problem still exists you should add a drop of dye or stain to the sample. Stains
make hard-to-see objects like plant cells stand out.
BATTERY INFORMATION:
This unit uses 2 AA 1.5 volt batteries. Always use
fresh batteries. Do not mix old and new batteries. Do not mix batteries of different
types. Remove exhausted batteries and dispose of them properly. If this toy will not
be used for an extended term please remove the batteries. Do not try to recharge a
non-rechargeable battery. Rechargeable batteries are to be removed from the toy
before being charged. Rechargeable
supervision. Only batteries of the same or equivalent type as recommended are to be
used. Do not take a battery apart. Do not short-circuit the terminals. Do not dispose
of batteries in fire - they may explode.
C
I
ARE
NSTRUCTIONS
Wipe the microscope body with a damp cloth; then dry with a clean, soft cotton
cloth. To clean the lenses, gently wipe them with cleaning cloths or wipes
specifically designed for camera or binocular lenses.
batteries are only to be charged under adult
Instructions for the
WARNING! Only for use by children over 8 years old.
Only for use under the supervision of an adult.
Product made in China
Manual printed in China

Advertisement

loading
Need help?

Need help?

Do you have a question about the C-900M and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for cassini C-900M

  • Page 1 All I can see is a partial circle of light. Why? To see your sample properly, you need to have even light shining up through the slide. If you are using the mirror for light, try gently moving it about while looking through the microscope until you see an evenly lit full circle.
  • Page 2 You should replace the water with clean salt water every three or four days. Use a ELCOME TO THE ICROSCOPIC ORLD magnifying glass to study the brine shrimp. Start with the dried eggs, We take great pleasure in introducing you to the world of the microscope. Your new then study an egg that has been in the salt water for a few hours.
  • Page 3 ONTENTS AKING A ERMANENT LIDE Start with a clean slide and slide cover. Take care when handling these slide 300X/600X/900X microscope with mirror and electric covers. light 1 Petri dish with 1 cover 1 Shrimp hatchery with 1 cover Follow Steps 2 and 3 above. 5 Prepared plastic slides Before placing the slide cover over your sample add several drops of gum 7 Blank slides...
  • Page 4 Place the microscope on a flat surface near a bright light, or in the daytime, a window. Turn the focusing knob until the objective lens is almost touching the slide. Locate the mirror and adjust the angle so that when you look into the eyepiece you Don’t let the lens touch the slide as you may break the slide and damage the see a bright circle of light.