How To Start - JMC Nomade User Manual

How to start

Before using this device, please read the following sections carefully: 'Safety and Disclaimers'.
1. To connect your device with Bluetooth, push the On/Off button. When the light is on, select 'JMC Nomade'
on your smartphone or tablet and connect the two devices. If you want to use another source, it is important
to disconnect the previous source completely before connecting the new source.
2. You can change the volume through you smartphone or tablet, or directly through the JMC Nomade. It is
advised to set the volume of your source at a high level and to use the volume buttons of the JMC Nomade
to change the volume.
3. If your source doesn't have a Bluetooth connection, you can connect through a cable using the mini jack
stereo entry of the JMC Nomade. In this case the volume buttons of the JMC Nomade are deactivated and
you can change the volume through your source.
4. You will be able to push the pause button in order to put the JMC Nomade in stand-by mode at any time.
This enables you to answer your telephone for example.
Back
Page | 6
Volume -
Volume +
On/Off
Pause
www.jmclutherie.com
Input mini jack or cinch.
Exemple:
Power outlet