1. Manuals
  2. Brands
  3. IBT Technologies Manuals
  4. Touchscreen
  5. IBT-3601
  6. Manual

IBT Technologies IBT-3601 Manual

7" touchscreen with eden c3 embedded processor
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
IBT-3601
7" TouchScreen with EDEN C3 Embedded Processor
•
CRT/Panel 7"•CompactFlash•133MHz FSB•
•
ATA/33/66/100•Mini PCI•SO-DIMM•
•LAN•Audio•RS-232/422/485•
•4COM•PC/104•USB•TV-Out•DOC•
•WDT•H/W Monitor•Single +5V•
•Industrial Embedded Single Board computer•

Advertisement

Table of Contents
loading

Summary of Contents for IBT Technologies IBT-3601

  • Page 1 IBT-3601 7" TouchScreen with EDEN C3 Embedded Processor • CRT/Panel 7"•CompactFlash•133MHz FSB• • ATA/33/66/100•Mini PCI•SO-DIMM• •LAN•Audio•RS-232/422/485• •4COM•PC/104•USB•TV-Out•DOC• •WDT•H/W Monitor•Single +5V• •Industrial Embedded Single Board computer•...
  • Page 2 Copyright Disclaimers: The accuracy of contents in this manual has passed thorough checking and review before publishing. IBT Technologies Inc., the manufacturer and publisher, is not liable for manufacturer will any infringements of patents or other rights resulting from its use. The...

  • Page 3: Table Of Contents

    Table of Contents Chapter 1 General Description ........1 1.1 Major Features ............... 2 1.2 Specifications ................ 3 1.3 Board Dimensions..............4 Chapter 2 Unpacking ..........5 2.1 Opening the Delivery Package..........5 2.2 Inspection................5 Chapter 3 Hardware Installation ......7 3.1 Before Installation ..............7 3.2 Board Layout .................
  • Page 4 Chapter 4 AMI BIOS Setup ........31 4.1 Starting Setup..............31 4.2 Using Setup ................. 32 4.3 Main Menu................33 4.4 Standard CMOS Setup ............34 4.5 Advanced CMOS Setup ............35 4.6 Advanced Chipset Setup............ 36 4.7 Power Management Setup ..........37 4.8 PCI / Plug and Play Setup...........
  • Page 5 Safety Instructions Integrated circuits on computer boards are sensitive to static electricity. To avoid damaging chips from electrostatic discharge, observe the following precautions: • Do not remove boards or integrated circuits from their anti- static packaging until you are ready to install them. •...

  • Page 7: Chapter 1 General Description

    Chapter 1 General Description The IBT3601 is a Touch Screen of 7” with a fan less computer using the latest technologies. The motherboard is a 100/133MHz FSB VIA VT8606 chipset-based board designed with a MiniPCI Local Bus VIA C3 EDEN 667MHz Embedded CPU.

  • Page 8: Major Features

    1.1 Major Features The motherboard comes with the following features: • 7” LCD touch screen • VIA C3 EDEN 400/667/733MHz Embedded Low Power CPU • VIA VT8606/VT82C686B system chipset • Mini PCI Local Bus support • Supports 100/133MHz FSB • One SO-DIMM socket with a max.

  • Page 9: Specifications

    1.2 Specifications CPU: VIA C3 EDEN 400/667/733MHz Embedded Low Power CPU Bus Interface: Mini PCI Local Bus Memory: One SO-DIMM socket supporting up to 256MB Chipset: VIA VT8606/VT82C686B I/O Chipset: SMC 37C669, VIA VT82C686B CompactFlash: One standard CompactFlash adapter VGA: VIA VT8606 integrated S3 3D supporting CRT/Panel displays up to 1920 x 1440 IDE: Two IDE disk drives supporting ATA/33/66/100 and with transfer rates of up to 33/66/100MB/sec.
  • Page 10 1.3 Specifications...

  • Page 11: Chapter 2 Unpacking

    Chapter 2 Unpacking 2.1 Opening the Delivery Package The IBT3601 SYSTEM is packed in an anti-static bag and foam protection. Do not remove the wrapping until proper precautions have been taken. Safety Instructions in front of this manual describe anti-static precautions procedures.

  • Page 12: Hardware Installation

    Chapter 3 Hardware Installation and Service This chapter provides the information on how to install the hardware or service the IBT3601 SYSTEM. This chapter also contains information related to jumper settings of switch, watchdog timer, and the DiskOnChip address selection etc. 3.1 Before Installation After confirming your package contents, you are now ready to install your hardware.

  • Page 13: Board Layout

    Board Layout...

  • Page 14: Jumper List

    3.3 Jumper List Jumper Default Setting Setting Page WDT Active Type Setting: Disabled All Open Clear CMOS: Normal Operation Short 1-2 JP4(1-4) DOC Address Select: D000 Short 1-2, 3-4 JP4(5-10) WDT Timer Select: 1sec. Short 5-6, 7-8, 9-10 RS-422/485 Receiver All Open Enabled/Disabled Select: Disabled COM2 Use RS-232 or RS-422/485...

  • Page 15: Configuring The Cpu

    3.5 Configuring the CPU The IBT3601 system embedded with a VIA C3 EDEN 667MHz CPU. User don’t need to adjust the frequently and check speed of VIA C3 EDEN CPU. 3.6 System Memory The IBT3601 SYSTEM BOARD provides one SO-DIMM socket at locations DM1.
  • Page 16 3.7.1 Installing DiskOnChip Modules When installing a DiskOnChip module onto your board, please take note of the following: 1. Orient yourself properly with the location of the DiskOnChip socket. Try to locate the pin 1 location on your socket. Pin numbers are usually printed on either the component side or the solder side of your board.

  • Page 17: Vga Controller

    2. Insert the screwdriver’s flat head into a gap on either end of the socket. Do not insert the screwdriver head on either side where the pins are located. Doing so might damage the pins in the process. 3. Slowly lift the screwdriver handle upwards. This will disengage the module from its socket.
  • Page 18 CN21: 50-pin Panel Connector PIN. Description PIN Description ENAVDD 3.3V/5V ENAVDD ENAVEE ENAVEE PD10 PD11 PD10 PD11 PD12 PD13 PD12 PD13 PD14 PD15 PD14 PD15 PD16 PD17 PD16 PD17 PD18 PD19 PD19 PD18 PD20 PD21 PD20 PD21 PD22 PD23 PD22 PD23 PD24 PD25...

  • Page 19: Pci E-Ide Drive Connector

    PCI E-IDE Drive Connector CN23 is a standard 44-pin 2.0mm pitch connector daisy-chain driver connector serves the PCI E-IDE drive provisions onboard . A maximum of two ATA/33/66/100 IDE drives can be connected to the system board via CN23. CN23: IDE Connector Description Description IDERST...

  • Page 20: Floppy Disk Drive Connector

    3.10 Floppy Disk Drive Connector The system board uses a standard 34-pin header connector, CN8, for floppy disk drive connection. A total of two FDD drives may be connected to CN8 at any given time. CN8: FDC Connector Description Description DRVDEN0 DRVDEN1 INDEX#...

  • Page 21: Serial Port Connectors

    3.11 Serial Port Connectors The system board offers two NS16C550 compatible UARTs with Read/Receive 16-byte FIFO serial ports and four internal 10-pin headers and one RS-422/485 connector. CN16: COM1 Connector (5x2 Header) PIN Description PIN Description DCD1 DSR1 DCD1 DSR1 RXD1 RTS1 RXD1...
  • Page 22 CN19: COM4 Connector (5x2 Header) PIN Description PIN Description DCD4 DSR4 DCD4 DSR4 RXD4 RTS4 RXD4 RTS4 TXD4 CTS4 DTR4 TXD4 CTS4 DTR4 CN10: RS-422/485 Connector (5x2 Header, COM2) PIN Description PIN Description RTS- RTS+ CTS+ RTS- CTS- RTS+ CTS+ CTS- NOTE: The terminal resistance of RX &...

  • Page 23: Parallel Connector

    3.12 Parallel Connector CN12 is a standard 26-pin flat cable connector deigned to accommodate parallel port connection. CN12: Parallel Connector Description Description Strobe Auto Form Feed DATA 0 ERROR# DATA 1 Initialize DATA 2 Printer Select LN# DATA 3 DATA 4 DATA 5 DATA 6 DATA 7...

  • Page 24: Ethernet Connector

    3.13 Ethernet Connector The system board provides one external dual RJ-45 interface connector. Please refer to the following for its pin information. CN13: RJ-45 Connector PIN Description R/C GND R/C GND R/C GND R/C GND R/C GND R/C GND R/C GND R/C GND 3.14 USB Connector The system board provides one 8-pin connectors, at location CN1, for two...

  • Page 25: Power And Fan Connectors

    Before you turn on the power of your system, please IMPORTANT: set JP2 to Short 1-2 for normal operation. 3.16 Power and Fan Connectors System board provides one 5-pin power connectors at CN2. And one 2-pin power in at CN5. CN2: 5-pin ATX Power In Connector PIN Description PIN Description PS_ON...

  • Page 26: System Front Panel Connectors

    CN15: PS/2 6-pin Mini DIN Keyboard/Mouse Connector Description Keyboard Data Keyboard Clock Mouse Data Keyboard Data Mouse Data Keyboard Clock Mouse Mouse Clock Clock CN17: 6-pin Keyboard/Mouse Connector Description Keyboard Clock Keyboard Data Mouse Data Mouse Clock 3.18 System Front Panel Connectors The system board has one LED at location JP3 that indicates the power-on status.

  • Page 27: Watchdog Timer

    Connector JP3 Orientation PWR LED SPEAKER EXT_SMI PWR button RST_SW HD_LED SLP button CN25: External Reset Button PIN Description Reset 3.19 Watchdog Timer There are three access cycles of Watch-Dog Timer as Enable, Refresh and Disable. The Enable cycle proceeds via READ PORT 443H whereas the Disable cycle proceeds via READ PORT 045H.
  • Page 28 JP4(5-10): WDT Timeout Period Select Period PINS 5-6 PINS 7-8 PINS 9-10 Short Short Short 1 sec (default) 2 sec Open Short Short 10 sec Short Open Short 20 sec Open Open Short 110 sec Short Short Open 220 sec Open Short Open...

  • Page 29: Mini Pci Connector

    WT_DISABLE PUSH PUSH DX,WDT_DIS ; disable the WDT AL,DX ; get back AX, DX 3.20 Mini PCI Connector System board supports a Mini PCI connector. The peripheral component with standard Type1 Mini PCI can be used. For particular requirement, please refer to “Mini PCI series product” on website or contact with us.
  • Page 30 Description Description SERR# STOP# 3.3V PERR# DEVSEL# C/BE[1]# AD[14] AD[15] AD[13] AD[12] AD[11] AD[10] AD[9] AD[8] C/BE[0]# AD[7] 3.3V 3.3V AD[6] AD[5] AD[4] REQ2 AD[2] AD[3] AD[0] GNT2 AD[1] GNT3 IRQ7 Mini PCI Socket pin orientation...

  • Page 31: Pc/104 Connectors

    3.21 PC/104 Connectors The PC/104 expansion bus offers provisions to connect all types of PC/104 modules. With the PC/104 bus being known as the new generation of industrial embedded 16-bit PC standard bus, thousands of PC/104 modules from multiple venders can be easily installed onboard.
  • Page 32 CN4: PC/104 64-pin Connector Description PIN Description Connector diagram rotated 90 degrees -IOCHECK clockwise from RESETDRV original position IRQ9 -12V +12V IOCHRDY -SMEMW SA19 -SMEMR SA18 -IOW SA17 -IOR SA16 -DACK3 SA15 DRQ3 SA14 -DACK1 SA13 DRQ1 SA12 -REFRESH SA11 SYSCLK SA10 IRQ7...

  • Page 33: Audio Connectors

    3.22 Audio Connectors The system board has an onboard AC97 3D audio interface. The following tables list the pin assignments of the Line In/Audio Out connector. CN9: Line In/Audio Out Connector PIN Description PIN Description AOUTL AOUTR AOUT_L AOUT_R MIC IN MIC IN 3.23 CompactFlash...

  • Page 34: Game Port Connector

    Description Description EWE0 VCC (+5V) Reset IORDY REQ 0 IDE LED PDIAG DATA 8 DATA 9 DATA 10 Inserting a CompactFlash card into the adapter is not a difficult task. The socket and card are both keyed and there is only one direction for the card to be completely inserted.

  • Page 35: Tv-Out Connector

    3.25 TV-Out Connector System board can support TV-Out function which input could be up to 800 x 600 graphics resolutions. World Wide Video standards are supported including NTSC-M (North America, Taiwan), NTSC-J (Japan), PAL-B, D, G, H, I (Europe, Asia), PAL-M (Brazil), PAL-N (Uruguay, Paraguay) and PAL-NC (Argentina).

  • Page 36: Chapter 4 Ami Bios Setup

    Chapter 4 AMI BIOS Setup The ibt3601 system board uses AMI BIOS for the system configuration. The AMIBIOS setup program is designed to provide the maximum flexibility in configuring the system by offering various options that could be selected for end-user requirements. This chapter is written to assist you in the proper usage of these features.

  • Page 37: Using Setup

    Using Setup In general, you use the arrow keys to highlight items, press <Enter> to select, use the <PageUp> and <PageDown> keys to change entries, and press <Esc> to quit. The following table provides more detail about how to navigate in the Setup program using the keyboard. Move to previous item ↑...

  • Page 38: Main Menu

    Main Menu Once you enter the AMI BIOS CMOS Setup Utility, the Main Menu will appear on the screen. The Main Menu allows you to select from several setup functions and two exit choices. Use the arrow keys to select among the items and press <Enter>...

  • Page 39: Standard Cmos Setup

    Standard CMOS Setup The Standard Setup is used for the basic hardware system configuration. The main function is for Data/Time and Floppy/Hard Disk Drive settings. Please refer to the following screen for the setup. When the capacity of the IDE hard disk drive is larger than 528MB, you must set the HDD mode to LBA mode.

  • Page 40: Advanced Cmos Setup

    Advanced CMOS Setup This section allows you to configure your system for the basic operation. You have the opportunity to select the system’s default speed, boot-up sequence, keyboard operation, shadowing and security. AMIBIOS SETUP – ADVANCED CMOS SETUP (C)2001 American Megatrends, Inc. All Rights Reserved Quick Boot Enabled Available Options:...

  • Page 41: Advanced Chipset Setup

    Advanced Chipset Setup This section allows you to configure the system based on the specific features of the installed chipset. This chipset manages bus speeds and the access to the system memory resources, such as DRAM and the external cache. It also coordinates the communications between the conventional ISA and PCI buses.

  • Page 42: Power Management Setup

    Power Management Setup The Power Management Setup allows user to configure the system for saving energy in a most effective way while operating in a manner consistent with his own style of computer use. AMIBIOS SETUP – POWER MANAGEMENT SETUP (C)2001 American Megatrends, Inc.

  • Page 43: Pci / Plug And Play Setup

    PCI / Plug and Play Setup This section describes configuring the PCI bus system. PCI, or Personal Computer Interconnect, is a system that allows I/O devices to operate at speeds nearing the speed the CPU itself uses when communicating with its own special components. This section covers some very technical items and it is strongly recommended that only experienced users should make any changes to the default settings.

  • Page 44: Peripheral Setup

    Peripheral Setup The IDE hard drive controllers can support up to two separate hard drives. These drives have a master/slave relationship that is determined by the cabling configuration used to attach them to the controller. Your system supports two IDE controllers--a primary and a secondary--so you can install up to four separate hard disks.

  • Page 45: Hardware Monitor Setup

    4.10 Hardware Monitor Setup AMIBIOS SETUP – HARDWARE MONITOR SETUP (C)2001 American Megatrends, Inc. All Rights Reserved *** System Hardware Monitor *** Available Options: TSENS1 Temperature Disabled CPU Fan Speed Enabled Vcore Reset + 2.500V + 3.300V + 5.000V ESC: Exit : Sel PgUp/PgDn: Modify F2/F3: Color...

  • Page 46: Change Supervisor/User Password

    4.12 Change Supervisor/User Password AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Enter new supervisor password: _ Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings Save Settings and Exit Exit Without Saving...

  • Page 47: Auto Configuration With Optimal Settings

    PASSWORD DISABLED. When a password has been enabled, you will be prompted to enter it every time you try to enter Setup. This prevents an unauthorized person from changing any part of your system configuration. Additionally, when a password is enabled, you can also require the BIOS to request a password every time your system is rebooted.

  • Page 48: Auto Configuration With Fail Safe Settings

    4.14 Auto Configuration with Fail Safe Settings When you press <Enter> on this item you get a confirmation dialog box with a message similar to the figure below. This option allows you to load/restore the default values to your system configuration, optimizing and enabling all high performance features.

  • Page 49: Save Settings And Exit

    4.15 Save Settings and Exit Pressing <Enter> on this item asks for confirmation: AMIBIOS HIFLEX SETUP UTILITY – VERSION x.xx (C)2001 American Megatrends, Inc. All Rights Reserved Standard CMOS Setup Advanced CMOS Setup Advanced Chipset Setup Power Management Setup Save current settings and exit (Y/N) ? Y Change Supervisor Password Auto Configuration with Optimal Settings Auto Configuration with Fail Safe Settings...

  • Page 50: Exit Without Saving

    4.16 Exit Without Saving Pressing <Enter> on this item asks for confirmation: Quit without saving (Y/N)? Y This allows you to exit Setup without storing in CMOS any change. The previous selections remain in effect. This exits the Setup utility and restarts your computer.
  • Page 51 This page is intentionally left blank.

  • Page 52: Chapter 5 Software Utilities

    Chapter 5 Software Utilities This chapter contains the detailed information of IDE, VGA and LAN driver installation procedures. IDE Driver Installation The utility disk that came with the delivery package contains an auto-run program that invokes the installation programs for the IDE, VGA and Audio drivers.
  • Page 53 2. Go to the VIA4in1 directory and run setup Once the Welcome screen appears on the screen, make sure to close any applications running and then click on the Next button.
  • Page 54 When the Readme window pops on the screen, you may read the whole document including the license agreement or just press Yes to skip through and continue installation. The 4 in 1 Setup dialog is now displayed. Select on Normally Install and then click on Next.
  • Page 55 The next window lists all components detected in your system and asks you to select the ones requiring drivers. Tick on all items then proceed by clicking on the Next button below the screen. The program starts to install the ATAPI driver when you click the Next button on the screen below.
  • Page 56 The following screen then gives you the choice of installing the AGP driver in standard o turbo mode. Select on the Standard Mode and then click on Next to proceed. 10. Installation of the AGP driver is now complete. Once the screen below appears, select on restarting your computer to activate all drivers/settings completed.

  • Page 57: Vga Driver Installation

    VGA Driver Installation 5.2.1 VGA Driver Installation for WIN95/98/2K With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the CD-ROM drive. As soon as the system reads the disk - Click on VIA_8606 director Select the operating system folder of your computer to proceed with the installation process.
  • Page 58 Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button. When the display below appears on your screen, Setup is already ready to install and copy the related files onto your hard drive.
  • Page 59 After the installation finishes, you will be prompted to restart your system. We recommend you to reboot your computer to allow the new settings to take effect. Click on the Finish button to reboot. 5.2.2 VGA Driver Installation for WIN NT4.0 Click the Start button on the lower left hand corner of your screen, then select Setting.

  • Page 60: Vga Driver Installation For Win Nt4.0

    Specify the path of the new driver and then press on Enter. (If in driver D:, type d:\Vga/Via_8606/Nt40) Select S3 Graphics Twister Click OK or press Enter.
  • Page 61 You will see warning panel about Third Party Drivers. Click on Yes to finish the installation. Once the installation is completed, you must shut down the system and restart for the new driver to take effect.

  • Page 62: Lan Driver Installation

    LAN Driver Installation 5.3.1 LAN Driver Installation for WIN95/98/2K 1. With the Utility CD Disk still in your CD ROM drive, right click on My Computer icon from the Windows menu. Select on System Properties and then proceed to the Device Manager from the main menu.
  • Page 63 2. Select on Other Devices from the list of devices then double-click on PCI Ethernet Controller.
  • Page 64 3. The PCI Ethernet Controller Properties screen then appears, allowing you to re-install the driver. Select Driver from the main menu to proceed. 4. The window then displays the current status of your LAN driver. Press on Update Driver button to continue. 5.
  • Page 65 6. When the succeeding window asks you what you wish Windows to do, tick on the “Search for a better driver….” Click on the Next button to proceed. 7. The Update Device Driver Wizard will then ask you to specify, by ticking, the path of the new driver.
  • Page 66 8. Press on the OK button as soon as you have located the path of your driver. 9. Once the program returns to the Add New Hardware Wizard screen, your specified location will appear. Press on the Next button to continue. 10.
  • Page 67 11. When copying of driver files finishes, the program will then ask you to insert your Windows. 12. The program then copies the necessary files from your Windows installation disk to complete the driver setup process. Once the driver is completely installed, the following message appears on your display.

  • Page 68: Lan Driver Installation For Win Nt4.0

    5.3.2 LAN Driver Installation for WIN NT4.0 With the Utility CD Disk still in your CD ROM drive, right click on Network Neighborhood icon from the Windows menu. Select on Properties. The system automatically detects the absence of Windows NT Networking.
  • Page 69 Tick on the “Wired to Network” once the following screen appears. Click on the Next to proceed. Click on the Start Search button for the program to locate the Network Adapter.
  • Page 70 Once setup finishes the search, it will list a number of adapters for you to choose from. Press on the Have Disk button to assign the driver path location. Setup now asks you for the location of the driver. When you have entered the new driver path, press on the OK button to continue.
  • Page 71 When Setup finds the information it needs about the new driver, it will display the device it found on the following screen. Press on the OK button to accept and proceed. Setup then returns to Network Setup Wizard screen and displays your new Network Adapter.
  • Page 72 The Network Setup Wizard then allows you to set the Network Protocols on your network. Select the appropriate protocol and then click on Next to continue. 10. Before Setup starts installing the components found and the settings you made, it will give you the option to proceed or go back for changes from the following screen.
  • Page 73 11. Windows NT Setup will then need to copy files necessary to update the system information. Specify the path then press Continue. 12. Once it finishes copying the files, Setup will now allow you to choose the Duplex Mode of your LAN controller. Press on the Continue button after making your selection.
  • Page 74 13. When Setup asks if you wish to change the TCP/IP settings of your system, select the appropriately. The default choice is No. 14. Setup then starts the Networking installation and copies the files.
  • Page 75 15. When Setup finishes copying, the TCP/IP properties of your system will then pop up on your screen like the one shown below. Make the necessary changes then click on OK to continue. 16. When the screen below appears, click on Next to continue.
  • Page 76 17. Setup then prompts you that it is ready to start the network. You may complete the installation thereafter. Click on Next to continue. 18. Assign the workgroup or domain setting of your computer. Click on Next to continue.
  • Page 77 19. Restart your computer once the screen below appears. Click on Finish to continue. 20. Click on the Yes button to restart your computer. The LAN driver installation for WIN NT4.0 is now complete.
  • Page 78 Audio Driver Installation With the Utility CD Disk still in your CD ROM drive, open the File Manager and then select the CD-ROM drive. As soon as the system reads the disk, Click on VIA_AC97 directory. Once the Welcome screen appears on the screen, make sure to close applications that are running and then click the Next button.

  • Page 79: Audio Driver Installation

    The Select Components dialog box is now displayed. Select on Install driver and then click on Next. The program will now require the Windows installation disk for proper hardware installation. Insert the CD and then click on Next.
  • Page 80 When the display below appears on your screen, Setup is already installing and copying the related files onto your hard drive. Click on the Next button to proceed. After the audio driver installation finishes, select the Finish button to complete the installation process.

Table of Contents