Harman Kardon DVD 25 Service Manual page 19

DVD25/DVD101
VI) On the Power Supply cable, cut the pin 1 harness wire close to the connector on J5.
Solder a new jumper wire to extend the connection from harness wire 1 to U11 pin 3 of the 3.3 volt
regulator (BA033T). See illustration.
VII) Re-check the mechanism alignment with the front panel by plugging the unit in, turning ON, and
opening and closing the tray with the eject button.
Replace top cover.
Test unit for DVD/CD function.
Serial Number (120v)
Model
WA-0002-01000
To
DVD25
WA-0002-10677
WA-0002-10678
DVD25
And above
If Replacement Of Laser Pick-Up
Label on ass'y reads:
DVD-KIT500SE
Original KIT500 is no longer stocked
Label on ass'y reads:
DVD-KIT710SE
19
Status
Assembly is Needed,
If Replacement Of Laser Pick-Up Assembly is Needed,
Order Assembly WLD5.018.011XX Only
harman/kardon
Action
Follow full instructions
above for replacement