Quick start guide Disk Installation Welcome If your V2 was purchased as part of a bundle, please skip this section and Thank you for choosing Proavio immediately go to section 6. If your V2 was purchased without disk drives, Thank you for choosing Proavio V2 , the first professional 12G SAS desktop...
Page 3
Quick start guide V2 System Overview - Rear V2 System Overview - Front This section provides information on the rear features of your EB800MS V2. This section provides information on the front features of your EB800MS V2. Figure 5 ASC Mode...
Page 4
PCi-e RAID Controller Installation HBA/RAID Controller Installation - Cont’d V2 has been designed to support high data rates required by today’s non-linear Please follow your RAID controller’s software driver installation process editing, color grading and VFX systems. Proavio recommends installing your RAID to ensure proper operation &...
Page 5
Connecting Your V2 - 8 Disk Configuration 12G SAS Cable Overview Connect both data ports from your V2 to your RAID adapter’s Port 1 and Port 2 Your EB800MS V2 features a next generation 12G SAS interface, using the new inputs for eight-disk RAID configurations.
Always double check for loose cable connections or improperly seated disk drives. If the problem persists, please contact your dealer or contact Proavio’s support department at 866-537-5140. If you are outside the US, please call us at +1 (562) 777-3488.
Need help?
Do you have a question about the V2 and is the answer not in the manual?
Questions and answers