Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Summary of Contents for ATZ E-BELL
- Page 1 IP/Network Doorbell Quick Installation Guide V3.1...
- Page 2 1. Interfaces Instruction 1. Front Panel 2. Back Panel...
- Page 3 2. Doorbell Installation...
-
Page 4: Mobile Phone App
3. Mobile Phone APP 1. Install APP a. Scan the below QR Code. b. Search “Yoosee” on APP Store. c. Visit http://www.yoosee.co to download. 2. Register and login APP. 2. Choose register mode 1.Open APP and click 3. Make sure you and finish it as tips. -
Page 5: Network Configuration
4. Network Configuration 1. Power on the doorbell and wait for starting. (It will have the sound tip if the doorbell starts). 2. Smartlink mode to make Wi-Fi connection - within 5 minutes with doorbell power on. Tip: Ensure the Wi-Fi that you set can connect to the mobile phone or tablet normally. 1.Open the software. - Page 6 Remark: For security purpose, there is no default password, which need the user set the device password for the first time. (Password must be 6-30 characters, including alphabetic and number.) 3. Add doorbell remotely, choose “Manual Add”. 2. Input device ID, name 1.
-
Page 7: Security Protection
5. Visitor Calling 2. Popup message from 1.Visitor press the Call APP, answer or hang up. button. 3. After answering, you can call intercom, take photos, open the door etc. Full duplex intercom call, which is more convenient to use. 6. - Page 8 Alarm Settings: Receive alarm message: Opened by default. If closed, user cannot receive messages and alarm push. Alarm push ID: Add the first mobile phone by default configuration for bell. Support Max. five accounts. Alarm push Email: Binding mailbox. Bell will send visitor call and alarm images to the mailbox. Motion Detection: Closed by default.
- Page 9 Device Info: Display the current firmware information of the device. Date and Time: Set device time, the default automatic time synchronization network. Media Settings: Set image format (N/P) and reversal. Security Settings: Modify Admin Password. Network Settings: Switch the wired network and WiFi network. Alarm Settings: Configure the door phone alarm information.
-
Page 10: Main Specification
9. Indoor Dingdong Chime/Bell 1. 433MHz 2. Learning Code 3. Distance: 30-80m 4. 52 Musics Pairing Program Instruction 1. Select music before pairing. 2. Activate Pairing – 2 ways as below: a. Press both volume button and music button. b. Long press volume button for 5 seconds. When either operation above is finished, hearing “Dong”...
Need help?
Do you have a question about the E-BELL and is the answer not in the manual?
Questions and answers